Forum

Building boxes... p...
 
Share:
Notifications
Clear all

Building boxes... post yours too

67 Posts
12 Users
0 Reactions
516 Views
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

boxes seem to be my thing. I always find myself building them for as long as I am woodworking. I always knew that boxes are the foundation of basic woodwork. with boxes you can make Cabinets, tables, chairs... etc.
here is my latest build. an record LP(long playing) box.

still without a bottom, decided to pop the grain with oil before poly can be applied.


click my signature and it will take you there........

 
Posted : 18/06/2011 2:22 am
ernie_serrano
(@ernie_serrano)
Posts: 337
Reputable Member
 

Re: Building boxes... post yours too

I'm more into smaller boxes, jewelry or for any other small items

Attached files

EdGES Drywall and Ceiling Specialists[COLOR="Orange"]

 
Posted : 18/06/2011 5:44 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Building boxes... post yours too

Nice Ernie, I have several builds as well...here's some...

[IMG] http://www.pinoyhandyman.com/


click my signature and it will take you there........

 
Posted : 18/06/2011 11:56 pm
ernie_serrano
(@ernie_serrano)
Posts: 337
Reputable Member
 

Re: Building boxes... post yours too

ganda ng mga hardware, where do you buy them? the hinge i like.

EdGES Drywall and Ceiling Specialists[COLOR="Orange"]

 
Posted : 19/06/2011 12:10 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Building boxes... post yours too

ganda ng mga hardware, where do you buy them? the hinge i like.

Hafele brader...


click my signature and it will take you there........

 
Posted : 19/06/2011 12:38 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too


wow super laki ng pic ko!

platera..dismantled and salvaged this 12mm thick x 13" wide plank..wood is dirty (from decades of use perhaps)...

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 6:49 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

wetted the surface if indeed my suspicion was right.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 6:53 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

drawbacks to salvaged lumber...nailheads here and there.

Uploaded with ImageShack.us

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 6:55 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

measured 1.5" from edge and cleared this nail studded part with a jigsaw..sayang wood!

Uploaded with ImageShack.us

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 6:58 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

hmmm...looks and smells narra!

Uploaded with ImageShack.us

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 7:00 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

see more of the wood by clearing surface dust and dents..of course i cant do handplaning nowadays this wide..this job is for my 2012NB in hibernation.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 7:04 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

much better now..i see a future project for this.

note that the bosch 4100 is leveled to all of my work tables..this time as an outfeed table for the thicknesser...much easier to work now than 1 year before.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/06/2011 7:05 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

to continue making the sides of the box..a long strip of 12mm x 120mm plank..straightening using the #5.

using a straight edge to check for the straightness

The devil will find work for idle hands to do.-Morrissey

 
Posted : 01/07/2011 7:04 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

on the rt with a 12mm straight bit to make the recess for the bottom board

The devil will find work for idle hands to do.-Morrissey

 
Posted : 01/07/2011 7:07 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Building boxes... post yours too

test fit..slightly loose.

time to cut them to length..i turned to my miter saw sporting the new cmt blade

close up view of the carbide tooth edge...laser cut indeed.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 01/07/2011 7:25 am
Page 1 / 5
Share: