Magandang araw sa lahat,
Bros, Anong joint ang kailangan kung gagawa ako ng frameless 3/4 Plywood hanging cabinet? yung simple lang. An image will be very helpful at hindi ako familiar sa terminology.
Common tools lang ang gamit ko. Please also suggest kung anong tools ang kailangan para mapadali pag gagawa.
Salamat
Re: Hanging Kitchen Cabinet Joint
Im just starting woodworking as a hobby but I managed to built a hanging cabinet using a 3/4" plyboard using simple butt joint. My build is very simple.
The photo shows the front view and right side view
the joint I used looks like this: (not my own pics, just downloaded)
At first I tried to use nails but the joint seems to be very weak so I replaced it with wood screws. It becomes more sturdy. Adding 1/4" plywood as back cover made it a lot stronger.
Hope this helps..
Re: Hanging Kitchen Cabinet Joint
Im just starting woodworking as a hobby but I managed to built a hanging cabinet using a 3/4" plyboard using simple butt joint. My build is very simple.
The photo shows the front view and right side viewthe joint I used looks like this: (not my own pics, just downloaded)
At first I tried to use nails but the joint seems to be very weak so I replaced it with wood screws. It becomes more sturdy. Adding 1/4" plywood as back cover made it a lot stronger.
Hope this helps..
This is very helpful.
Papaano yung pagkabit nito sa pader? may makapal pa bang kahoy na kailangan? saan banda ididikit sa cabinet yung kahoy? anong size ng kahoy?
I remove the image link because of the warning:
vBulletin Message
In an effort to stamp out forum SPAM only members with 5 posts or more can post website links or email addresses.
Re: Hanging Kitchen Cabinet Joint
Google plywood joints and you'll find a lot of useful info. This one particular result I find very informative:
http://www.scribd.com/doc/3797/Plywood-Users-Guide
As for attaching the cabinet to the wall, one way to do it is by using french cleats:
http://www.finewoodworking.com/SkillsAndTechniques/SkillsAndTechniquesArticle.aspx?id=31583
http://www.newwoodworker.com/frenchcleat.html
HTH.
Re: Hanging Kitchen Cabinet Joint
Manipis yung ginamit ko na plywood as back cover kasi yung sides ang dinikit ko sa pader but in your case pag back mismo yung idikit mo you need a 3/4 plywood as well.
Gumamit ako ng 4 pcs na 3/8" dia x 2"L na tox and use masonry drill sa pader para maikabit yung cabinet. I think yung suggestion ni sir joey is a better alternative.
Re: Hanging Kitchen Cabinet Joint
Thanks for the help
