Been searching for the build hardware and so far this is what I find.
Pretty dissent for a locally available key hole but very thick hope I can incorporate it in the build.
Can’t find the hinges instead I found this, “tung oil”
Re: Jewelry Box 4 SWMBO
Last week I start stock preparation and manage to glue some panels, Used biscuit hence it is only ½ “ thick.
This are the 2 sides.
Re: Jewelry Box 4 SWMBO
Lay out the legs and cut it later.
Glue the top it is ¾ “ thick.
This is where I stop last week.
And last Saturday I started marking for some rabbet for the 2 sides.
Re: Jewelry Box 4 SWMBO
Run it to my router table equipped with a ½” straight cutting bit.
Cut up nicely and clean its Makita brand pardon for the advertisement but this bit is my very 1st set pero sadami na ng wood na dinaanan nito clean cut parin. TIBAY
Test fitting.
Re: Jewelry Box 4 SWMBO
Cut the legs also in the router table so it will stay nice and straight.
Re: Jewelry Box 4 SWMBO
Dry fitting the case.
The wood here is not on my side after a week of gluing it warp and impossible to slide on the rabbet so I just slice it 2 ½” wide in the table saw.
Re: Jewelry Box 4 SWMBO
Assemble and glue next Saturday ko uli sya pagpapatuloy hanap hanap muna ako ng hardware para sa kanya.
Re: Jewelry Box 4 SWMBO
para ka namang ninja, hit and run :p:p, tambay ka naman ng konti... very nice elaborate work as usual bro. will keep an eye on this thread...
click my signature and it will take you there........
Re: Jewelry Box 4 SWMBO
makes me want to get a biscuit jointer , really clean and alingned
Re: Jewelry Box 4 SWMBO
makes me want to get a biscuit jointer , really clean and alingned
Bee get a dissent biscuit jointer, mine is not, just don’t have the option.;)
Re: Jewelry Box 4 SWMBO
Had a chance to work on this last Saturday and made some drawer, Start with the panel cutter.
Test for spacing.
Perfect sides and button gap.
Re: Jewelry Box 4 SWMBO
Had to replace my saw blade to dado, here I want a 1/8” boxjoint it should be a haft blind dovetail but its too time consuming wish I have a dovetailing jig.
Made a jig again.
The cut is clean its all in the jig, BUT I STILL WISH I HAVE A DOVETAILING JIG.
Re: Jewelry Box 4 SWMBO
Test Fitting, pahinga muna next week uli.:p
Re: Jewelry Box 4 SWMBO
you rest a lot... lol :p. hahahaha, nice work as usual Emerson, starting to take shape and looks good as always. oh, well we'll just have to wait till the next weekend...
cheers
click my signature and it will take you there........
Re: Jewelry Box 4 SWMBO
Its been a slow week for me kaya eto lang muna.
I’ m starting to make dado for the plywood to make a drawer, once again I used the dado blades a little larger than ¼” for the plywood to slide.
As what Timber said this model of dado produces a very clean cut.
May saw blade is a 50 teeth thin kerf combination blade its been a year and it still stay sharp just wondering if ever it becomes dull is there a locally shop here that hone saw blades.
