Forum

Share:
Notifications
Clear all

MDF Boards Projects

242 Posts
70 Users
0 Reactions
5,305 Views
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Someone on the chat room requested me to post my WIP.

It's been a month I'm very busy cutting/assembling & installing MDF boards for kitchen, closet, cabinets. I already consumed 40+ sheets of 4'x8' boards.

Only this time ko lang naisipan to take pics of my work.

MDF waste starts to pile up.

My Messy workshop.

 
Posted : 09/06/2011 7:15 pm
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: MDF Boards Projects

Full Height Closet , 1.35mL x 2.5mH x 0.58m depth
Carcass - 18mm MDF 2F White
Drawer - 15mm MDF 2F White
Doors - 18mm MDF 1F White with Multiform Laminate (Fushia Pink & twilight Pink)
Hinges - Besser Fulloverlap , soft close,
Drawer Guide - 450mm Full extension, ball bearing type.
Handle - 300mm Stainless Steel

The Carcass

Multiform Laminate for Doors

With Doors Installed

With Door Closed

Stainless Steel handles to be installed tomorrow.

 
Posted : 09/06/2011 7:23 pm
(@leoneboy)
Posts: 4
New Member
 

Re: MDF Boards Projects

wow! nice work Bryantt, is this for business or home use? me too also busy doing kitchen cabinets, any feedback in using MDF boards for carcas and cabinet doors over plywood and plyboard? i'm using plywood and plyboard ever since. . .

 
Posted : 09/06/2011 8:06 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: MDF Boards Projects

Nice work bryant, hope you could post pics on the edge banding as well.

We would appreciate the costing and sources as well 🙂

For more of the latest tools, deals and tips - click HERE

 
Posted : 09/06/2011 8:07 pm
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: MDF Boards Projects

@leoneboy

This one is for business. Ginagamit ko for home use yun mga excess boards pag may free time. Most of the kitchen cabinet na nakikita mo sa home depot MDF ang ginagamit. If you use plywood or plyboard kailangan mo pa ipaint or adhere some laminate to achieve nice finish.

@Jarod
I use PVC Edge Band white, 1mm thick for the carcass & 2mm thick for the door edging.
Manual lang yun paglalagay ng edge band. Trim the edge using GMR1 Bosch & flush cut router bit with bearing then use the chisel to remove the sharp edge. Wala pa kse budget sa Edge banding & trimmer machine.

Cost:
MDF 18mm 2Face White - P1,530/sheet
MDF 15mm 2face White - P1,365/sheet
MDF 3mm 1F white - P600/sheet
PVC Edge Band 1mm - P11/m
PVC Edge Band 2mm - P18/m
Multiform Laminate - P710/sheet
Multiform Adhesive - P550/gal
Hinge Soft Close - P100/pc
Drawer Guide - P220/pair
handle Stainless - P280/pc

Boards by World Class Laminate
Laminate (Pink) by Multirich

 
Posted : 09/06/2011 10:47 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: MDF Boards Projects

Wow, thanks for the info bryant! I think the extra premium would justify the faster build and prepared finish based on the usage. The reason why I asked I have seen a video that also uses laminated MDFs and was amazed on the turn-around time. It may not have the classic wood finish btu I guess it would really depend on the project's purpose.

Keeping on the topic of MDF projects, could you share more on your experiences when dealing with MDF in terms of tools, supplies, safety gears, curing time, assembly precautions etc.

Very rare do we get to see a project and most specially someone close to the community who really builds and makes a living out of it so it would be a great opportunity to the community to learn from you in your most convenient time. We would also like to see more pics if you may in your next projects 😀

For more of the latest tools, deals and tips - click HERE

 
Posted : 09/06/2011 11:45 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: MDF Boards Projects

Bro ... your work reminds me of Ikea furniture.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 10/06/2011 2:48 am
(@balarila)
Posts: 1368
Noble Member
 

Re: MDF Boards Projects

Beautiful. Simply beautiful.

Do MDF boards weigh less or more than plywood of same thickness? I have some plywood closet doors done by karpinteros that keep falling off the piano hinges either because the doors weigh to much or the hinges used were inappropriate.

 
Posted : 10/06/2011 4:38 am
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: MDF Boards Projects

Bro ... your work reminds me of Ikea furniture.

@JayL, Bo Concept inspire me more.

http://www.boconcept.com.ph/Default.aspx?ID=83750

MDF Cabinets best match with glass and stainless steel.

@Balarila
MDF weigh more than plywood or plyboard. For MDF qty of hinge to be used is determined by the size of the door.

 
Posted : 10/06/2011 8:42 am
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: MDF Boards Projects

I started making MDF Cabinets way back 2007 with "zero" knowledge. After some research & scrutinizing how this cabinet was made and tell to my self "I can do it also". One of our client requested if I can make a kitchen for her similar to the display on Kitchen One & Metastone. Without any hesitation I said "YES" (brave man) :D:D:D

I acquired my first wood working tools the bosch GSK 190, Bosch GMR1, Black & Decker Cordless Drill. Until know they are still on my side.

My first kitchen project.
MDF 18mm - Wengue by World Class Laminate
Hinges - Blum by Deepe Marketing
Drawer Mechanism - Blum by Deepe Marketing
PVC Edge Band - Rehau by Deepe Marketing

Picture of the Pantry Unit (Part of the Kitchen)

 
Posted : 10/06/2011 9:29 am
(@bryant77)
Posts: 480
Reputable Member
Topic starter
 

Re: MDF Boards Projects

Blum Inner drawer mechanism with Blumotion - 30kg & 50 kg capacity.
Hinge Blum Zero Protrusion with Blumotion

Blum Tandem Box with Gallery Rail - 50 kg Capacity

What I like with blum tandem box drawer mechanism is you can aligned the drawer face (vertical - horizontal) using a philips screw driver. Adjustment screw is hidden on the plastic cover cap with Blum logo on the side of mechanism.

 
Posted : 10/06/2011 9:31 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: MDF Boards Projects

bro..you are now elevated as the master of mdf cabinetries!

har! har! har!

can you point to me exactly where i can buy the blum drawer glides?

they are expensive but for some kitchen cabinetries, i want my drawers to glide and last long.

i know for sure you know about the hazards of using contact cement but...

i do not know also of any glue to replace the speed and durability of contact cement.

@balarila,

a piece of 18mm mdf weighs a ton to me! hehehehe

The devil will find work for idle hands to do.-Morrissey

 
Posted : 10/06/2011 11:46 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: MDF Boards Projects

Blum slides are great but very costly too especially the Blumotion models, do you have the prices for these? hopefully they also carry the center mounted models (hidden from view) :dance1:
nice work brader... what you need really are mdf blades for your cs....:dance1::dance1::dance1:


click my signature and it will take you there........

 
Posted : 10/06/2011 11:58 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: MDF Boards Projects

@timber,

are there available bottom mounted blum glides as well?

The devil will find work for idle hands to do.-Morrissey

 
Posted : 10/06/2011 12:06 pm
(@bigfoot2)
Posts: 362
Reputable Member
 

Re: MDF Boards Projects

What's the joinery used for these laminated MDF?

Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.

 
Posted : 10/06/2011 12:24 pm
Page 1 / 17
Share: