Hi, been here for a while but mostly browsing and viewing. At last!!! I had the chance to have my own small place to work and the opportunity to apply what I learned from your posts.
So I decided to change my old and small computer table built from a few pcs of 3/4 plywood.
into something bigger and with storage space. Sorry don't have pictures from the start but this is still unfinished with only the table top and carcass made. Still need to make the drawers but decided to try it out after putting sanding sealer. Full extension drawer slides will be used
Table top is 3/4 ply and 3/8 ply ( 1/2 here when you buy it ) glued and edge banded. The rest are made using 3/4 ply..
I want the finish to be dark brown. Can I use wood stain and if yes what color? Looking for advise. Thanks and Merry Christmas to all.
Re: My first project - a computer table
unique ang design mo bro, simple, ganda!!! mas maganda sana kung nauna ang staining kaysa sealer para magpenetrate ang wood stain sa kahoy, pero pwede pa rin sya.
Re: My first project - a computer table
you can use dark mahogany if you like it dark with a hint of red. for me, plywood veneer is just too open grained and would prefer a paint so I can get the smoother finish. I tried staining my plywood desk and with so much stain it looked painted. save the pain and go direct to paint (you do have to apply putty for a smooth finish). but of course that is my opinion...
Nice work, for a first project that looks way better and more complicated than mine... congrats
click my signature and it will take you there........
Re: My first project - a computer table
thanks, this design was not the original intention but I always prefer having an open space under the sides of the table top. this way I can hide my regulator, power strips and other things and be accessed easily without reaching under the table.
from my previous desk, all I was thinking during this build was how to take things out of my table top, even my coffee cup.
@timber
thanks for the comment and advise. this makes me think again. hope i'll be able to decide when the drawers are done.
Re: My first project - a computer table
Subscribed.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: My first project - a computer table
I would agree on the unique design, it makes the project a lot better and look to have more value. Try both methods of finishing on plywood scraps and decide from there which suits your taste.
Re: My first project - a computer table
Bro dsam,
Ibang design yang comp table mo ah, I guess it will be practical specially with the addition of some drawers on one side and the other side open as you have said for your regulators and other stuffs.
I'll wait 'til your next post when it is all done and finished., Congrats bro, very nice project !!!!
CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw
Re: My first project - a computer table
Thank you for the comments.
I can't think of another way to connect the boxes and the table top when i built it. Aside from the storage space, I want to get the feel of the table as early as possible since I really want to check if it will be very comfortable for me. With my line of work, I spend long hours using the computer.