Forum

my wood working att...
 
Share:
Notifications
Clear all

my wood working attemp

15 Posts
13 Users
0 Reactions
119 Views
(@spot10)
Posts: 20
Eminent Member
Topic starter
 

after building my wooden boat and got frustrated by the lack of manpower turning my boat upside down and vise versa i decided to do a bathroom lavatory thingy so i went to the lumber shop and bought a narra 1x24x6 a yakal 1x8x8 and a tanguile 2x18x12 all kiln dried but still somewhat rought so that i couls try my hands on real wood works

now my problem is my hand planes is not w tuned very well and wheni started to plane the tanguile i noticed that the thickness is now uneven it has a .2 inch diff from diff side im using 5stanley and 3

can a thicknesser fix this problem? thanks in advance by the way ill post picture later cant get heads or tails in using an ipad ehehehe

 
Posted : 11/12/2012 10:52 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: my wood working attemp

That wide board reminded me of this WIP ......

http://www.pinoyhandyman.com/showthread.php?t=849&highlight=conference+table&page=5

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 12/12/2012 12:40 am
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: my wood working attemp

after building my wooden boat and got frustrated by the lack of manpower turning my boat upside down and vise versa i decided to do a bathroom lavatory thingy so i went to the lumber shop and bought a narra 1x24x6 a yakal 1x8x8 and a tanguile 2x18x12 all kiln dried but still somewhat rought so that i couls try my hands on real wood works

now my problem is my hand planes is not w tuned very well and wheni started to plane the tanguile i noticed that the thickness is now uneven it has a .2 inch diff from diff side im using 5stanley and 3

can a thicknesser fix this problem? thanks in advance by the way ill post picture later cant get heads or tails in using an ipad ehehehe

Bro, I thought there was something wrong with my eyes or glasses when I saw these pics this am, hahaha, LOL , pacensya na, I kept on adjusting my eye glasses kasi but still the same, your pics pala ang medyo blurred and kuha.

Again pacensya na po ! 🙂

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 12/12/2012 4:31 pm
(@spot10)
Posts: 20
Eminent Member
Topic starter
 

Re: my wood working attemp


heres a better version hehehe

pano po pla remedyo pag may maliliit na biyak? thanks

 
Posted : 12/12/2012 5:34 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: my wood working attemp

i dont know why but i always feel nostalgic whenever i see old used timber...

when you desecrate these oldies, you must make sure they will be something better than their old lives.

sarap mag wood work jan lalo na pag cleaning time..it appeals to me a workshop with tiled surfaces...easy clean up..manually or by vacuum.

wala ng kokontra! hihi

V

pahabol...epoxy mo yung void sa wood if you will make it your workbench..otherwise, wood putty will do.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 13/12/2012 11:31 am
(@george-sapnu)
Posts: 2
New Member
 

Re: my wood working attemp

hi guys, i just retired and i'd really go into some woodworking things. also, just registered with pinoyhandyman. question: what tools do i need to have to do some simple projects, repairs in the house and furnitures?

 
Posted : 26/06/2014 4:16 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: my wood working attemp

we are more than glad to have you here bro...

I believe there are other threads which specifically details the list of tools (basic) to have to do some house repairs and building some woodwork projects.

lets wait for the techie guys to pinpoint to us the links in these site.

cheers!

The devil will find work for idle hands to do.-Morrissey

 
Posted : 26/06/2014 8:09 pm
horge
(@horge)
Posts: 226
Estimable Member
 

Re: my wood working attemp

hi guys, i just retired and i'd really go into some woodworking things. also, just registered with pinoyhandyman. question: what tools do i need to have to do some simple projects, repairs in the house and furnitures?

v is right: there are older threads on this subject.
However, I can't seem to find them, lol.
🙂

So here's my attempt at a basic handyman tool list.

Safety goggles/glasses
Workgloves

Screwdrivers, both phillips and flathead
Allen wrench set
Tape measure, english/metric, 5y/5m
Straightedge/level
Speed square
Carpenter's/Framing square
Caulking gun
Soldering Iron, coil of solder

Linesman's pliers
Longnose pliers

Claw Hammer (preferably all-steel)
Cold chisels
Wood chisels
Hand saw
Metal hacksaw
Small block plane
Wood rasp

Bastard file
Round file
C-clamps
F-clamps
Locking pliers
Monkey/Adjustable Wrench

Hammer drill, variable speed (chuck capacity 13mm)
HSS and masonry drill bit sets
Plunge router (collet capacity 1/2" with adapter for 1/4")
Router bit sets
Random orbit sander
I'm iffy on circular saws, lel: an electric jigsaw is safer, but less useful

A functioning workbench

Masonry chisel
Demolition hammer/prybar, or some TNT and detcord

 
Posted : 03/07/2014 8:14 am
timber715
(@timber715)
Posts: 5424
Member
 

hi guys, i just retired and i'd really go into some woodworking things. also, just registered with pinoyhandyman. question: what tools do i need to have to do some simple projects, repairs in the house and furnitures?

Try the basics...
Drill
Hammer
Screwdrivers
Saw (powered or not)
Chisels would be handy
Sandpapers
Ruler or tape measure
Posted via PHM Mobile


click my signature and it will take you there........

 
Posted : 04/07/2014 3:07 am
Joel
 Joel
(@joel)
Posts: 49
Eminent Member
 

Re: my wood working attemp

my basic tools when I started woodworking:

Hammer
Saw (not powered)
Screwdrivers
Sandpapers
& Tape measures

 
Posted : 10/07/2014 10:29 am
VivaFoxpro
(@vivafoxpro)
Posts: 108
Estimable Member
 

Re: my wood working attemp

hi guys, i just retired and i'd really go into some woodworking things. also, just registered with pinoyhandyman. question: what tools do i need to have to do some simple projects, repairs in the house and furnitures?

Buy the tools as needed.

Looking around the house, ano na ba ang kelangan ayusin or pagandahin?

Mas logical ito kesa bibili tayo ng martilyo tapos maghahanap ng mapupukpok 😀

Just...[COLOR="Red"]DRILL IT!

 
Posted : 11/07/2014 12:19 am
bugel
(@bugel)
Posts: 1131
Noble Member
 

Re: my wood working attemp

I agree to vivaFoxpro.."kesa bibili tayo ng martilyo tapos maghahanap ng mapupukpok :D" natawa tuloy ako hehehe..

Everytime i buy tools i always ask myself..kailangan ko ba ito? Madalas ko bang gamitin to? O bibilin ko lang dahil gusto ko..
Lagi ako nag fall sa "kailangan ko ito dahil gamitin ko ito" kailangan be wise din sa pagbili..hindi yung bibili ka ng tools at aamagin lang sa iskaparate.imho

Sent from my iPad using Tapatalk

 
Posted : 11/07/2014 2:21 pm
(@evolution-fab)
Posts: 31
Eminent Member
 

Re: my wood working attemp

I agree to vivaFoxpro.."kesa bibili tayo ng martilyo tapos maghahanap ng mapupukpok :D" natawa tuloy ako hehehe..

Everytime i buy tools i always ask myself..kailangan ko ba ito? Madalas ko bang gamitin to? O bibilin ko lang dahil gusto ko..
Lagi ako nag fall sa "kailangan ko ito dahil gamitin ko ito" kailangan be wise din sa pagbili..hindi yung bibili ka ng tools at aamagin lang sa iskaparate.imho

Sent from my iPad using Tapatalk

Agree din ako dyan

Lagi ako naninimbang bago bumile ng gamit
At tinuturing kong investment ang mga ito kaya kailngan fully utilized to the last cent ng value nya.

Minsan sa dami ng gamit uubos pa ng oras yung pag hahanap sa tool box at may tendancy pa ng gawin nating kumplekado ang routine o trabaho sa paggamit ng misc tools.

Mas gusto ko pang mag invest sa shopequipment kesa sa mamahaling wrench set

Sent from my iPhone using Tapatalk

 
Posted : 11/07/2014 2:38 pm
(@balaga123)
Posts: 11
Active Member
 

Re: my wood working attemp

Regarding sa uneven thickness dun sa tanguile, Gumamit ako ng plunge router na may diy straight jig for wood planing. That solved my problem but matrabaho.

 
Posted : 16/08/2014 10:59 am
(@jestag2)
Posts: 8
Active Member
 

Re: my wood working attemp

hi guys, i just retired and i'd really go into some woodworking things. also, just registered with pinoyhandyman. question: what tools do i need to have to do some simple projects, repairs in the house and furnitures?

Sir, kung simple house repairs and fix projects, you may want to get inspiration sa isang paborito'ng palabas ng anak ko sa disney junior, 'handy manny and the 7 tools'. 😉

1. vacuum cleaner
2. hammer
3. philip screwdriver
4. flat screwdriver
5. plier
6. pipe wrench
7. tape measure

 
Posted : 16/08/2014 4:24 pm
Share: