wife commissioned me to make this quick table she needs at her work
I am defintely getting that bosch table saw as a GIFT!!!
started with a 2 x 8 x 8ft armour wood brand radjata pine.
perfect cuts on the jimmy jig weeee
tenoned braces
then chamfered
Re: quickie table for the wife
mortised legs, thanks to drill press and chisels
attached
i realized i cant do a proper mortise and tenon on ALL the braces coz my wood is too thin
so i butt jointed the other braces underneath, reinforced with screws
was having problems with how to design the top. This is because i didnt really bother drawing anything when i did this.. pretty much like the dog house, and the aquarium stand hehehe
so laying the boards like this gave me an idea
since the butt jointed brace is lower than the other tenoned brace, it creates a recess where i can slap in a panel and at the same time add rigidity
Re: quickie table for the wife
ran out of the rdjata pine so i decided to put tanguile racing stripes in the middle.. hahahah
now i just need to chamfer all edges and sanding seal then poly with no stain.
Re: quickie table for the wife
you should have asked, I have an extra piece of that pine just hanging around...
swmbo should be happy, you should build more for her, projects = new tools... :p:p:p
click my signature and it will take you there........
Re: quickie table for the wife
oo nga eh. but she needed it by SAT!!!!! its nuts... its nuts i cut and assembled everything in one afternoon... mabuti hindi rough lumber.
the thing feels llike clay when chiseled.
i wanted a shaker table, but that will take ages for me 🙂
Re: quickie table for the wife
funny but ridata pine or any pine for that matter is considered a hardwood, even if it is very soft...
that is the same problem I had when I made an audio bench since I had to screw mount it to the legs. I just reinforced it with epoxy to add strength...
click my signature and it will take you there........
Re: quickie table for the wife
hmmmm
i used resin based glue for this thing more fool proof the h20 resistant stuff... i chiseled wrong on one of the joints. Hence the glue was needed hehehe
well radjata is harder than matimco's weather wood.
Re: quickie table for the wife
Could construction grade lumber handle the stress of a tenon similar to a solid wood?
Re: quickie table for the wife
whats construction grade lumber? tanguile din yun diba? or coco lumber?
I believe they can since pine is softer.
Re: quickie table for the wife
will sand with grit 80 then wiped on with fake tung oil care of Zar
Re: quickie table for the wife
nice work again... title is quite misleading though... 😛
Re: quickie table for the wife
Thanks
errrmmmm TImber,.,., favor? ehheheh 🙂 Quick nalang yung first word ng title
Re: quick table for the wife
oo nga no? iba ang dating ng table use kung yun ang title :p:p. Done na...
nice work Bee, I like the design it has nice lines. kaya lang di ba dapat yung end grain dapat ang nasa stretchers, para pag nag expand, eh di mag open ang joints ng stretchers?
click my signature and it will take you there........
Re: quick table for the wife
....... oo nga no.
well i am not expecting it to expand since it will be indoors. contracting was what i had in mind. inside an n'th floor office kasi.
hmmm dang... dapat mabuti pag seal ko... 🙂
Re: quick table for the wife
Bee when you get hold of the Kreg jig you will probably find (just like me) that quickie quickie projects will a new turn and level. 😉
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS