Forum

Share:
Notifications
Clear all

sanding belt

15 Posts
5 Users
0 Reactions
88 Views
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Where can i buy sanding belt?I made a DIY but it doesn't work.thanks

 
Posted : 12/07/2012 10:27 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: sanding belt

Try mayon sa dasmarinas st. Binondo.


click my signature and it will take you there........

 
Posted : 13/07/2012 1:26 am
(@jbarot)
Posts: 60
Trusted Member
 

Re: sanding belt

what's wrong with the one you made? maybe people here can help you fix it if they know the problem. might even save you some money.

 
Posted : 13/07/2012 5:20 am
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Re: sanding belt

natanggal dun sa pinagdikitan ko.Elmers glue ang ginamit ko na pandikit,baka po meron kayong maitutulong,salamt po

 
Posted : 15/07/2012 10:06 am
(@willyfernando)
Posts: 799
Prominent Member
 

Re: sanding belt

natanggal dun sa pinagdikitan ko.Elmers glue ang ginamit ko na pandikit,baka po meron kayong maitutulong,salamt po

I think PVA based glue won't work. You need a higher temperature tolerance adhesive that is designed for conditions with hi friction like conveyors and sanders. PACMAC may be able to help you but they aren't cheap.

 
Posted : 16/07/2012 12:47 am
(@jbarot)
Posts: 60
Trusted Member
 

Re: sanding belt

ah, elmer's glue won't do.

it will just melt on you as willy has said.

 
Posted : 16/07/2012 7:09 am
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Re: sanding belt

what about rugby?

 
Posted : 16/07/2012 5:01 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: sanding belt

naku lalo na rugby..ayaw niyan mainitan...

anu ba size ng belt sander mo?

V

The devil will find work for idle hands to do.-Morrissey

 
Posted : 16/07/2012 6:11 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: sanding belt

sabi nga ni boss willy...yang belt sander must tolerate heat due to friction...

bumili ka na lang..me mga bagay na ubra pagtipiran kasi...

DIY other things but not sanding belts.

me variable speed ba belt sander mo? baka mas ok pa premium double sided tape kesa sa elmers or any other pva based glue..

V

i have 4 x 24 sized sanding belts ..i can sell some..just pm me.

The devil will find work for idle hands to do.-Morrissey

 
Posted : 16/07/2012 6:16 pm
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Re: sanding belt

3x8 na ozito.ang mahal kasi ng shipping fee sa online.Ibebenta ko na kaya gus2 ko DIY na lang muna sanding belt ko then palitan ko ng orbital sander.hirap kasi maghanap ng sanding belt

 
Posted : 16/07/2012 7:00 pm
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Re: sanding belt

I think PVA based glue won't work. You need a higher temperature tolerance adhesive that is designed for conditions with hi friction like conveyors and sanders. PACMAC may be able to help you but they aren't cheap.

san po mabibili yang PACAMAC?

 
Posted : 16/07/2012 7:04 pm
(@willyfernando)
Posts: 799
Prominent Member
 

Re: sanding belt

PACMAC is a chemical specialist company in Makati (EDSA Guadalupe). They formulate or tool adhesives for industrial use. However it might not be practical for your objective. Try to get in touch with QC ABRASIVES in Kamias Rd. Quezon City. They specialize in all kinds of abrasive materials including sanding belts. They are open to small orders and sizes. Their contact Numbers are 9226871 and 9296335. The brand that they carry is FUJI STAR w/c is made in Japan. Hope this finally solves your problem.

 
Posted : 16/07/2012 10:40 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: sanding belt

3x8 na ozito.ang mahal kasi ng shipping fee sa online.Ibebenta ko na kaya gus2 ko DIY na lang muna sanding belt ko then palitan ko ng orbital sander.hirap kasi maghanap ng sanding belt

Remove the belt from the ptool and measure it from its sides and check how long the circumference is, that is what you need. 3x8 is too short kasi... Must be 3x24" meron sa mayon sa binondo. 78pesos lang... Baka mas makamura ka pa pagbumili ka than experiment. Besides sanding belts use a different type of sand paper, cloth based yung recommended. And not paper backed.


click my signature and it will take you there........

 
Posted : 17/07/2012 3:42 am
(@willyfernando)
Posts: 799
Prominent Member
 

Re: sanding belt

Ozito belt sanders, specifically for models BSG-152 & BSR-800 use 3"x 18" belts while the BSR 1000 uses 3"x 21" belts. QC ABRASIVES will accept even single orders for pickup customers. They also have hook and loop type disks for palm and orbital sanders. There were previous posts about another manufacturer of German made belts in Timog Q.C. somewhere in the Scout area. I believe it was the thread about orbital sanders particularly the Bosch Random orbital sander. If you can scan those posts maybe you can find that supplier. Good luck.

 
Posted : 17/07/2012 11:06 am
(@ruel_g)
Posts: 80
Trusted Member
Topic starter
 

Re: sanding belt

I'll try...But i'd like to apologized for giving wrong size of my sanding belt,It's 3x18 and not 3x8...Thanks to Sir timber 715...

 
Posted : 17/07/2012 8:13 pm
Share: