Re: Shoe Cabinet - Small and simple plywood furniture.
ahehe... sabi ni client ilalagay niya sa kitchen. kaya kitchen cabinet tawag ko diyan. nyahehe. siya rin yung nagbigay sakin ng design and specs.parang working table sir. polyurethane yung top coat niyan sir kaya labas ang kintab. i just followed your procedure but instead of boysen clear lacquer i used hudson polyurethane.
gusto ko rin sana mag invest sa brad nailer kaya lang wala pa akong nahahanap dito samin na mabibilhan ng brad nails. de pukpok lang muna ako ng finishing nails. hehe
thanks ulit sir.
kaya pala extra gloss ang top is because you used hudson polyurethane, not bad talaga. May available ngayon sa Wilcon na high gloss urethane na 1 part lang no need for catalyst i just can't remember the brand name.
Good idea to use hudson..kaya lang kung nasa production set-up ka na medyo mahal ang poly..malaking portion din sa production cost, apektado mark-up mo.
Meron ako na-try na new process sa lacquer and I achieved an almost mirror shine din. pM ko sayo for your next project.
Re: Shoe Cabinet - Small and simple plywood furniture.
Yes sir. thanks. turuan niyo po ulit ako. i have still have on going projects, this time im working on a bookshelf. nung nakita ng officemates yung mga projects ko. nag si-pagawaan sila.. busy ngayon ang after office hours ko. umaalma na si commander. pero pag hindi ako gumagawa tinataboy naman ako sa shop. hehe. bihira kasi yung plywood na kita yung grain pag kafinish. kaya thanks to you.
Re: Shoe Cabinet - Small and simple plywood furniture.
Inspired by bryant77, i tried using laminate on plyboard. Medyo nahirapan kasi first time..napaka fragile gawin dahil malutong ang laminate..tsaka walang plan B pag nagkamali. My workspace is not ready for this finish option..kelangan may wide space for applying contact cement on both plyboard and the laminate. Mabusisi.
I used Unica brand and Unisia contact cement.
.
.
...will go back to lacquer type finish.
Re: Shoe Cabinet - Small and simple plywood furniture.
Thanks adzz, simple na lang gawin talaga ito para sa akin because of the help I'm getting from my DIY plywood rip cut jig.
1 whole sheet of 3/4" plywood. 1/3 sheet of 1/2" plywood for the drawer parts, and 1/3 of 1/8" for the backing. The dimension is 32"W x 44"H x 10" D..the plan?..he he ida-download ko pa sa utak ko pag may USB port na ;).This is the finished shoe cabinet.
Sir Armand pwede nyo po e share kung pano nyo ginawa ang paint finish ng shoerack nyo?
thanks
Re: Shoe Cabinet - Small and simple plywood furniture.
Sir Armand pwede nyo po e share kung pano nyo ginawa ang paint finish ng shoerack nyo?
thanks
@asdfgerc: please read back. naka post na in this thread yung procedure ba ginawa ko dito..
Re: Shoe Cabinet - Small and simple plywood furniture.
share ko lng po yung version ko ng shoe cabinet based on sir armand's design.
thank you sir armand...:thanks:
Re: Shoe Cabinet - Small and simple plywood furniture.
Very nice jhun18..good job..hope to see more of your woodworking projects.
Re: Shoe Cabinet - Small and simple plywood furniture.
share ko lng po yung version ko ng shoe cabinet based on sir armand's design.
thank you sir armand...:thanks:
just want to comment on finishing... mukhang kinulang pa sa masilya yung plywood or hindi talaga na masilyahan... kita kasi yung mga lubog ng grains ng plywood 🙂
pero maganda yung pagka assemble ng cabinet.
Re: Shoe Cabinet - Small and simple plywood furniture.
Very nice jhun18..good job..hope to see more of your woodworking projects.
thanks again sir armand..
Re: Shoe Cabinet - Small and simple plywood furniture.
just want to comment on finishing... mukhang kinulang pa sa masilya yung plywood or hindi talaga na masilyahan... kita kasi yung mga lubog ng grains ng plywood 🙂
pero maganda yung pagka assemble ng cabinet.
thanks sir nick ... you're right sir kulang sya s masilya medyo hirap pa kasi ako mag-apply ng masilya eh.
Re: Shoe Cabinet - Small and simple plywood furniture.
thanks sir nick ... you're right sir kulang sya s masilya medyo hirap pa kasi ako mag-apply ng masilya eh.
Don't worry jhun18 you can still improve in your succeeding projects. Just remember woodworking is two parts; working on wood and finishing, the amount of time you allot for finishing should not be a small fraction of the time from working on wood. Read articles from the internet about finishing..specially on plywood.
Re: Shoe Cabinet - Small and simple plywood furniture.
Don't worry jhun18 you can still improve in your succeeding projects. Just remember woodworking is two parts; working on wood and finishing, the amount of time you allot for finishing should not be a small fraction of the time from working on wood. Read articles from the internet about finishing..specially on plywood.
thanks for the encouragement sir armand. binabasa ko nga po yung mga previous threads about finishing (na medyo madugo nga talaga). And I need more practice and of course a lot of patience.
kaya pala extra gloss ang top is because you used hudson polyurethane, not bad talaga. May available ngayon sa Wilcon na high gloss urethane na 1 part lang no need for catalyst i just can't remember the brand name.
Good idea to use hudson..kaya lang kung nasa production set-up ka na medyo mahal ang poly..malaking portion din sa production cost, apektado mark-up mo.
Meron ako na-try na new process sa lacquer and I achieved an almost mirror shine din. pM ko sayo for your next project.
Sir armand baka pwede mo rin ma PM sakin yung almost mirror shine finish 🙂 meron akong on going project ngayun office table mukhang maganda yung mirror finish nito.
TIA.
Posted via PHM Mobile
Re: Shoe Cabinet - Small and simple plywood furniture.
Nick tell me kung anong kahoy gagamitin mo..is it plywood ba or hardwood..magkaiba kasi approach ko.
Re: Shoe Cabinet - Small and simple plywood furniture.
Nick tell me kung anong kahoy gagamitin mo..is it plywood ba or hardwood..magkaiba kasi approach ko.
Sir for Plywood only
