Share ko lang my latest wip. A study table for my eldest daughter.
I started to build the cabinet with 3 layers of drawers.
I've already cut the 3/4 plywood for the drawers.
I used Kreg Jig K4 Pocket Hole System to assemble the box. The frame is made of pine. (Easy to work on but very soft). Full extension drawer slides for bottom and middle drawer.
Here is my improvised wood rack made of scaffolding.
Re: Study Table
Glued several palo china together . I used elmer's wood glue. This will be used for the drawer's face.
While waiting for the glue to dry, I assembled the drawers. First I have to make 1/4" dadoes on the drawer sides, front & back with the help of my freud stacked dado blades.
Re: Study Table
Test cut muna with a piece of scrap plywood.
Medyo maluwag. My 1/4" plywood is undersized.
Re: Study Table
I assembled the sides and back first.
Then after measuring, I then cut the bottom part (1/4 plywood)
Finished assembling all 3 drawers.
Re: Study Table
Bro ... pag nag kreg ka ng drawers gumagamit ka pa ba ng glue?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Study Table
After several hours, maganda na ang kapit ng glue. Used a hand plane to even out the surface.
A few more passes sa jointer and thicknesser to reduce the thickness to 3/4".
Heto yun 1/3 sheet sander courtesy of Sir Golden.
Re: Study Table
Cut to size and test fitted it to the face frame.
Put the handles and lock
Re: Study Table
Natapos din yung drawer bank section.
Here is my apprentice.
Re: Study Table
Installed right angle bracket mounts around the top edge. These will be used to secure the desktop. (I just want to try these brackets instead of pocket holes. Para maiba naman.)
Cut the desktop. As you can see very little splinter when cross-cutting using a freud blade.
Mounted the desktop with 3/4 gypsum board screws.
Re: Study Table
Heto na mukha nang table.
You'll notice on the bottom the brace is somewhat odd. Request ng may-ari. Patungan ng paa.
Edge banded
May desk hutch pa ito.
That's all for now thanks for viewing.
Re: Study Table
@ Jayl
Pwede wala na, pero for added strength I always apply glue.
Re: Study Table
@ Jayl
Pwede wala na, pero for added strength I always apply glue.
Same here bro ... I always apply glue too. :thanks:
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Study Table
Continuation of my study table built
Cut the 3/4 plyboard for the hutch part of the study table
Loaded the stacked dado blades to the ts.
Re: Study Table
Test fit muna
Placed the three parts side by side to ensure that the grooves line up.
Attached the top portion and backboard
Re: Study Table
Attached the shelves
Clamped, glued and fastened using brad nails
Edge banded and added decorative molding to the top
Placed on top of the desk. Hindi ko pa siya screwed sa desk. Sa destination ko na siya i-assemble.
Finishing na lang and tapos na.
