Forum

Share:
Notifications
Clear all

Template making

9 Posts
4 Users
0 Reactions
70 Views
(@gcl2310)
Posts: 24
Eminent Member
Topic starter
 

Hi, I'm new on woodworking but I'm beginning to love it. I'm having a hard time on making templates for my router. I'm hoping that someone here can help me make one or teach me on how I can make one. I tried watching so many tutorials but I'm still having a hard time on making a template. I'm thinking that if I can actually see someone making it in front of me might help.

I'm from ParaΓ±aque. I only have a jigsaw and a router.

 
Posted : 21/08/2014 8:34 pm
 nick
(@nick)
Posts: 200
Estimable Member
 

Re: Template making

Hi gcl 2310, can you post some photos of the template that you want to do? it will help us here to visualize the things that you want.

 
Posted : 21/08/2014 9:49 pm
Armand
(@armand)
Posts: 837
Prominent Member
 

Re: Template making

1/4 plywood is my favorite material as template like this [COLOR="RoyalBlue"]one that i used when i built my [COLOR="RoyalBlue"]bandsaw.

 
Posted : 21/08/2014 10:15 pm
(@gcl2310)
Posts: 24
Eminent Member
Topic starter
 

Re: Template making

there.. I'm having a hard time on making it squared..

 
Posted : 22/08/2014 4:04 pm
 nick
(@nick)
Posts: 200
Estimable Member
 

Re: Template making

there.. I'm having a hard time on making it squared..

Ok... using your router and a straight bit, clamp a guide rail( can be any straight edge wood) then run your router along the guide rail.

Then use your jigsaw to finish of the corners...

 
Posted : 23/08/2014 11:19 am
(@gcl2310)
Posts: 24
Eminent Member
Topic starter
 

Re: Template making

will i just do that in the edge of my wood? i don't really get it.. sorry..

 
Posted : 24/08/2014 4:57 pm
 nick
(@nick)
Posts: 200
Estimable Member
 

Re: Template making

will i just do that in the edge of my wood? i don't really get it.. sorry..

do you really want to be a woodworker?

if having a photo in my reply and you dont get it, I think you need to attend a seminar in wood working for you to understand the basic technics πŸ™‚

 
Posted : 24/08/2014 9:24 pm
(@fortnapz)
Posts: 207
Estimable Member
 

Re: Template making

there.. I'm having a hard time on making it squared..

na confused ka siguro kung paano ilalagay ang guide rail dahil sa tingin ko magsinglaki lang ang base ng router mo at ang board na gawin mong template.

lagyan mo na lang ng guide ang ilalim ng butas na yan, something like this :

then use your router with flush trim bit.

 
Posted : 24/08/2014 10:21 pm
(@gcl2310)
Posts: 24
Eminent Member
Topic starter
 

Re: Template making

ah cge po.. I'll do that.. thank you!

 
Posted : 26/08/2014 4:14 pm
Share: