Forum

TS and RT plus thic...
 
Share:
Notifications
Clear all

TS and RT plus thicknesser workbench

21 Posts
6 Users
0 Reactions
132 Views
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

My TS and RT plus thicknesser project. I want to build may own complete wood working table it measure 28 x 60 inc. long I will start at the flat form with 4 wheels. I copy this from other forum which he used MDF board. I think it is required for MDF board if used as a flat form to make it strong base
So I used plyboard for the plat form and cut it into 28 x 60 inch long

And here is a plan that I got on the other forum so I have as reference

And here it is strait flute 3/4 router bits that I used on my router on this plyboard woooweee lot lots of woods dust hehehe and of course I use safety eye goggles to protect my SORE EYES hehehe mask and globs for my safety and health also. It was very hard to breading you will inhale lots of woods dust if don’t have a mask ….

 
Posted : 09/09/2010 4:48 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

I have lots old scrap plywood’s and I don’t want to throw into garbage or make it as a panggatong hehehe so I cut it into 4 inch. Strip with my TS and cut it with respective size wit my sliding mitre and then wood glue and gun nailer for the divider

And now to cover it with 1/2 marine plywood

Before I cover it I applied with clear solignum to make it sure that there is no termite will eat my plywood it seam that most of divider are old plywoods or used plywoods that I used ..

 
Posted : 09/09/2010 4:53 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

And cut the 4 corner so the wheel can mount on it

Glue on top of the divider

Nailed

4 inch wheels with lock

 
Posted : 09/09/2010 4:58 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

And ready to roll now.... hmmm where I put it on a safe place that my wife cant see it hehehe ohhh !!! my eyes is aching now need to rest muna and study my plan for more details hehehe:D

cheers:)

 
Posted : 09/09/2010 5:05 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: TS and RT plus thicknesser workbench

reduce your picture size thru photobucket, we cannot understand most of the writings kasi. try to limit them to 480x640pixels para hindi mag resize ang thread.


click my signature and it will take you there........

 
Posted : 09/09/2010 9:37 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: TS and RT plus thicknesser workbench

You just made a Torsion Box for the base. Nice work

 
Posted : 09/09/2010 10:37 pm
 pyth
(@pyth)
Posts: 131
Estimable Member
 

Re: TS and RT plus thicknesser workbench

very nice bro..parang gusto ko na rin mag post ng may newbie projects..

 
Posted : 10/09/2010 11:20 pm
ernie_serrano
(@ernie_serrano)
Posts: 337
Reputable Member
 

Re: TS and RT plus thicknesser workbench

sir, curious lang, how much would a thcknesser ng Ryobi Cost and san nakaka bili?

kaya ba nya mga hard wood? i usually play with the likes of yakal, narra, molave etc.

EdGES Drywall and Ceiling Specialists[COLOR="Orange"]

 
Posted : 11/09/2010 11:14 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

sir, curious lang, how much would a thcknesser ng Ryobi Cost and san nakaka bili?

kaya ba nya mga hard wood? i usually play with the likes of yakal, narra, molave etc.

sir ernie cost of ryobi thicknesser around 6k to 7k..performance no problem from hardwood like yakal narra and others

πŸ™‚

 
Posted : 12/09/2010 8:10 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

Okay for continuation of my project installed 2x 2 angle bar at both end of the platform for additional strength of the base

I used marine plywood ΒΎ thick 16 x 28 inc. square board and mounted with bolt and nuts

 
Posted : 12/09/2010 8:16 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

and make a tenon

measured the actual distance for mortising

and mortise

and mounted

 
Posted : 12/09/2010 8:24 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

and here it is

and then for the router table same procedure done in tablesaw

 
Posted : 12/09/2010 8:44 pm
ryobi
(@ryobi)
Posts: 694
Honorable Member
Topic starter
 

Re: TS and RT plus thicknesser workbench

 
Posted : 12/09/2010 8:57 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: TS and RT plus thicknesser workbench

looking good πŸ™‚

but your last pic is oversized πŸ˜›

 
Posted : 12/09/2010 9:57 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: TS and RT plus thicknesser workbench

Ryobi

yung ginamit mo na bit for the router. What is the size? coz a 3/4 straight bit is actually larger than a 3/4 plywood.

 
Posted : 13/09/2010 1:33 pm
Page 1 / 2
Share: