been into music lately and have registered in a number of audio sites locally. people there seems to want a stable tank like table for their equipments. so I decided to make another workbench, but with a twist. instead of designing it wor work, it will be designed to accommodate stuff for audio enthusiast. hopefully someone wants to buy it... hehehe
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
time to start cutting the tenons and mortise..
roughing it out...
I wanted a slightly loose joint for glue to fill in...
should be perfect once it is cleaned. though the depth has to be adjusted(too shallow)
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
click my signature and it will take you there........
Re: turntable workbench
Timber,
Do you use a jointer or are those stocks pre jointed? or do you plane after joining the 2 x 4's?
Re: turntable workbench
handplane to join, and handplane afterwards to clean. no access to a jointer....
click my signature and it will take you there........
Re: turntable workbench
wow! I still havent learned how to use a handplane properly (or power plane even). Nor do i have a proper one to start with
its quite nice to see how all your stocks are straight and same thickness. I ll keep an eye on this thread
Re: turntable workbench
I've done little today, so when I got home this evening I tried to get some work done. marked the legs and feet to avoid mistakes ( I learned from experience ).
then I laid out the mortise locations...
click my signature and it will take you there........
Re: turntable workbench
using a forstner bit on the drill press, I removed the bulk material and set the depth ...
seeing that I got the correct setting on the drill press, I drilled the rest...
click my signature and it will take you there........
Re: turntable workbench
time to bring the hand tools out...
got a pair of legs done and felt not to continue, so, I stop for the night before I start making errors.
click my signature and it will take you there........
Re: turntable workbench
here is a little update on the tt bench...
cleaned up the rest of the mortises on the legs...
and cut the mortises for the end cap of the shelves...
click my signature and it will take you there........
