Im new here, I joined the forum due to my interest in wood working and I was hoping to meet and share common interest. Sa mga newbie here I want to meet you! Doon sa mga experts ofcourse if you will permit I'd like to meet you too.
I hope maka share ng knowledge 😀 (if I have) pero sana makakuha ng tekniks sa mga experts dito. I was working alone in my shop relying on zero know how of wood working honestly. I just keep on going my own doing what I can imagine and think. konting research sa materials etc..
I will post my first project and maybe you may not believe i did it. I want to meet you guys and if ok visit your shop too..
Re: very interested to meet and learn from new, expert woodworkers out there.
lahat ng vertical about 1 ft long sa sides ng bed naka joiner
Re: very interested to meet and learn from new, expert woodworkers out there.
Im new here, I joined the forum due to my interest in wood working and I was hoping to meet and share common interest. Sa mga newbie here I want to meet you! Doon sa mga experts ofcourse if you will permit I'd like to meet you too.
I hope maka share ng knowledge 😀 (if I have) pero sana makakuha ng tekniks sa mga experts dito. I was working alone in my shop relying on zero know how of wood working honestly. I just keep on going my own doing what I can imagine and think. konting research sa materials etc..
I will post my first project and maybe you may not believe i did it. I want to meet you guys and if ok visit your shop too..
here are some of my fav tools
Re: very interested to meet and learn from new, expert woodworkers out there.
Wow! 1 din yang double deck bed ang gusto ipapagawa sakin ng misis ko. Matibay ba yang naka angle na stand nya sir? yung sa plan ko kasi straight na lang baka kasi bumigay yung itaas. ano ba diskarte nyan?
Re: very interested to meet and learn from new, expert woodworkers out there.
@pinoy.spirit
In behalf of the Admin..may suggest you introduce yourself first like what others did. Please go to "Outside DIY Shack" and click the Member Introduction sub-forum. Kindly indicate your current location, age, sex..etc.
Thanks.
Re: very interested to meet and learn from new, expert woodworkers out there.
nakapag post na sya Sir Armand >> http://pinoyhandyman.com/showthread.php?t=3358
last may 13 di lang detailed. hehehe nung nabasa ko kasi tong thread hinanap ko din sya sa Member Introductions.
Re: very interested to meet and learn from new, expert woodworkers out there.
Oo nga.
Posted via PHM Mobile
Re: very interested to meet and learn from new, expert woodworkers out there.
Im new here, I joined the forum due to my interest in wood working and I was hoping to meet and share common interest. Sa mga newbie here I want to meet you! Doon sa mga experts ofcourse if you will permit I'd like to meet you too.
I hope maka share ng knowledge 😀 (if I have) pero sana makakuha ng tekniks sa mga experts dito. I was working alone in my shop relying on zero know how of wood working honestly. I just keep on going my own doing what I can imagine and think. konting research sa materials etc..
I will post my first project and maybe you may not believe i did it. I want to meet you guys and if ok visit your shop too..
Hi Sir, medyo duda lang ako doon sa poste na nakazigzag. Sa palagay ko maganda kung may reinforcement sa gitna.
Re: very interested to meet and learn from new, expert woodworkers out there.
Wow! 1 din yang double deck bed ang gusto ipapagawa sakin ng misis ko. Matibay ba yang naka angle na stand nya sir? yung sa plan ko kasi straight na lang baka kasi bumigay yung itaas. ano ba diskarte nyan?
Boss Joel sa tingin ko matibay naman hardwood naman yung nailagay ko. yung pag cut ng mga stand walang galos at yan angle stand naman talagang buo yan hindi putol. yung pag cut ng angle stand ginamitan ko nalang ng circular saw sa upper and lower part pero natira ang gitna. kasi pag dating sa gitna in order na ma cut ko sya inclined ginamitan ko ng jig saw.
lahat ng sidings naka joiner and syempre meron pang pioneer wood glue at same time ni lock ko ng staineless scress sa bawat joiner para hindi bibitaw.
Para po bumigay ang angle stand kailangan mabali yung dalawang angle stand ng same time at bumigay din dapat ang back stand na dalawa.
Re: very interested to meet and learn from new, expert woodworkers out there.
@pinoy.spirit
In behalf of the Admin..may suggest you introduce yourself first like what others did. Please go to "Outside DIY Shack" and click the Member Introduction sub-forum. Kindly indicate your current location, age, sex..etc.
Thanks.
Boss Armand from Pateros po newbie lang pasensya na kung hindi naka pag intro ng maiigi. actually walang masyadong masabi dahil hindi naman po talaga ako born woodworker.. pero dahil sa malakas ang loob ko pumasok sa mga bago at may interest ako binili ko ang tools sabay sabay ng walang experience at all. so ibig sabihin walang urungan. kaya nun nag intro ako nothing to say talaga hoping nga na may makapansin sa akin and leave me a note or a post para makapag umpisa ng conversation. so buti po ngayon nung natapos ang 1st project ko binalikan ko ang Pinoyhandyman at decided to post some pics.
Pasesnya na po sa hindi pag intro the way you expect! Pero I just want to take this as opportunity to thank you Boss Armand, Boss Joe and Boss woodfanaticl for commentin sa post ko. And sa mga Pinoyhandyman members sana magkakilanlan tayo lalo na yung mga nearby po at madaling bisitahin at bumisita
Re: very interested to meet and learn from new, expert woodworkers out there.
Boss Joel sa tingin ko matibay naman hardwood naman yung nailagay ko. yung pag cut ng mga stand walang galos at yan angle stand naman talagang buo yan hindi putol. [COLOR="RoyalBlue"]yung pag cut ng angle stand ginamitan ko nalang ng circular saw sa upper and lower part pero natira ang gitna. kasi [COLOR="Red"]pag dating sa gitna in order na ma cut ko sya inclined ginamitan ko ng jig saw.
lahat ng sidings naka joiner and syempre meron pang pioneer wood glue at same time ni lock ko ng staineless scress sa bawat joiner para hindi bibitaw.
Para po bumigay ang angle stand kailangan mabali yung dalawang angle stand ng same time at bumigay din dapat ang back stand na dalawa.
Sir, actually maganda sya. Yung safety lang ng matutulog sa taas ang concern ako. Sa previous comment ko kaya ko nasabi na sa tingin ko kailangan ng reinforcement sa gitna ng side kasi katulad ng nasabi mo na solid wood sya pero nag cross cut ka sa gitna kaya naging zigzag. Lumiit yong grain nya dahil sa cross cut which is humina kahit solid at walang putol. Yong matutulog sa taas sa kahimbingan at nagawi sya sa bandang poste na yan lahat ng bigat nandyan. At dahil sa lumiit yong wood grain nya may tendency na bibigay.
Re: very interested to meet and learn from new, expert woodworkers out there.
Boss woodfanatic, huwag naman po sana na 400lbs ang mahihiga dun po medyo alangan. yung drawer cabinet under the deck support actually the deck itself kasi sa design the flooring of the upper deck is bolted 7 inches apart from the bolt of the cabinet drawer from the corners of the stand so yung weight force non pababa mahahati sa 2 points on each stand ( a total of 8 points at the upper deck of the bed ).
ang laban ko nalang dito yung pong stand at the back are all straight and joiners dont have lax to move front wise if the weight is in the front. and beside the whole structure including its side contribute to the strength of the whole double deck.
I understand that though new, we cannot the totally sacrifice the strength of any project just to meet the design.
Please but thank you as for sure I will have much thing to learn from you since you got more experience definitely compare sa akin na new lang. Im willing to learn, hope we can be friends in real life to the extent that I can see your work in person and how you do it hindi ko din po ipag dadamot those who want to see my work in real just pm me and lets meet
Salamat po and God Bless!
