Forum

Wood Cutter or Wood...
 
Share:
Notifications
Clear all

Wood Cutter or Wood Cutting Service

19 Posts
8 Users
0 Reactions
129 Views
(@tinmuning)
Posts: 14
Active Member
Topic starter
 

Hi. By any chance, someone knows where can I have wood cut into planks or panels?

Kailangan ko po for a bed box I'm designing e kailangan rounded yung corners (parang sa ilalim ng rocking crade).

Thanks in advance.

 
Posted : 02/02/2011 7:17 am
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Wood Cutter or Wood Cutting Service

Hi tinmuning, welcome to PHM!

From where are you so that members could point you to the nearest sash factories/wood worker that could be nearer to your place.

We would love to hear more about you on the "Members Introduction" thread. Enjoy your stay! 🙂

For more of the latest tools, deals and tips - click HERE

 
Posted : 02/02/2011 11:58 am
(@tinmuning)
Posts: 14
Active Member
Topic starter
 

Re: Wood Cutter or Wood Cutting Service

I'm from Marikina. But sash factories around Batasan & Commonwealth area would be fine as well.

Thanks in advance.

 
Posted : 02/02/2011 6:30 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Wood Cutter or Wood Cutting Service

i had a dowel made from a sash along common wealth..... malapit sa commonwealth toyota, same side as toyota. but cant quite recall if its before or after toyota, its definitely before petron i think

 
Posted : 02/02/2011 10:10 pm
(@tinmuning)
Posts: 14
Active Member
Topic starter
 

Re: Wood Cutter or Wood Cutting Service

Thanks beebeenator! I'm familiar with the area. I just hope they have this machine which can cut curves on wood.

 
Posted : 03/02/2011 8:34 am
 guad
(@guad)
Posts: 646
Honorable Member
 

Re: Wood Cutter or Wood Cutting Service

i had a dowel made from a sash along common wealth..... malapit sa commonwealth toyota, same side as toyota.

I assume you had a long dowel made, intended to be cut into shorter pieces. Curious to know how accurate and consistent they were able to make the dowel. For example, for 3/4" (19.05 mm), what was actual diameter and variation across length of dowel?

Did they use some kind of jig to ensure constant diameter?

 
Posted : 10/02/2011 1:26 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Wood Cutter or Wood Cutting Service

several sash factories usually have that dowel making machine which can bring out consistent sized dowels, having said that I cannot tell you if it is 0.0000001 mm accuracy since wood does move and it can change size with the temperature and climate any time.


click my signature and it will take you there........

 
Posted : 10/02/2011 1:35 pm
(@balarila)
Posts: 1368
Noble Member
 

Re: Wood Cutter or Wood Cutting Service

Pardon me hijacking this thread. I too am looking for a sash factory. I live in Antipolo closer to Marikina. I'm thinking of cutting a 3x16x12 plank into 3 or 4 thin slices. Any shops out there in my area who'd have the saw and the patience to carefully do this? Thanks.

 
Posted : 10/02/2011 1:39 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: Wood Cutter or Wood Cutting Service

I assume you had a long dowel made, intended to be cut into shorter pieces. Curious to know how accurate and consistent they were able to make the dowel. For example, for 3/4" (19.05 mm), what was actual diameter and variation across length of dowel?

Did they use some kind of jig to ensure constant diameter?

Guad, i asked for 3/4 and they gave me something a couple of mm wider and the "roundness" is not perfect, i doubt they used a jig and most likely did it by hand and feel on the lathe.

variation across the length... ummm i cant tell, coz ive cut them to size na.

I was going to use the dowels for the dog holes. Which work well after a few run with the spokeshave 🙂

 
Posted : 10/02/2011 8:27 pm
 guad
(@guad)
Posts: 646
Honorable Member
 

Re: Wood Cutter or Wood Cutting Service

Guad, i asked for 3/4 and they gave me something a couple of mm wider and the "roundness" is not perfect, i doubt they used a jig and most likely did it by hand and feel on the lathe.

Sounds even worse than I thought, like arnis sticks. Not even round? How did they manage that feat with a lathe.

I too am looking for a sash factory. I live in Antipolo closer to Marikina.

Try googling 'jefz sash'. There was a mention of it in a previous thread.

having said that I cannot tell you if it is 0.0000001 mm accuracy

It's OK. That happens to be 10e-10 meters a.k.a. one angstrom, which is about the size of the smallest molecule. At that scale, according to Mr. Heisenberg, no one else can either, and if they claimed to be able to, they would have almost no idea where the wood is.

Me, I just shoot for about 0.1 mm accuracy, which is reported to be about the tolerance of joints. Easy to remember, being only one decimal place on the digital caliper. This is about 100,000 medium-sized (10 angstrom) molecules.

 
Posted : 10/02/2011 10:52 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Wood Cutter or Wood Cutting Service

:d :d :d :d


click my signature and it will take you there........

 
Posted : 11/02/2011 1:53 am
(@balarila)
Posts: 1368
Noble Member
 

Re: Wood Cutter or Wood Cutting Service

It's OK. That happens to be 10e-10 meters a.k.a. one angstrom, which is about the size of the smallest molecule. At that scale, according to Mr. Heisenberg, no one else can either, and if they claimed to be able to, they would have almost no idea where the wood is.

The uncertainty principle! Ha-ha. You just made me miss college physics!

 
Posted : 12/02/2011 12:47 am
(@glen1234s)
Posts: 22
Eminent Member
 

Re: Wood Cutter or Wood Cutting Service

Dumb question lang po....

Bakit po ba tinawag na SASH factory.... ano po ibig sabihin nun?
Kasi po yung lolo ko sa bohol ang nakalagay lang sa naaalala ko eh furniture maker...
bakit ngayon meron na talaga SASH and Furniture...:confused:

i had a dowel made from a sash along common wealth..... malapit sa commonwealth toyota, same side as toyota. but cant quite recall if its before or after toyota, its definitely before petron i think

 
Posted : 01/03/2011 12:56 pm
 owyn
(@owyn)
Posts: 237
Estimable Member
 

Re: Wood Cutter or Wood Cutting Service

^ I believe sashes are the "hamba" or the wood that you fit into the wall where the door goes. Yung border. Maybe because it's so big that a maker will have to have a tablesaw and jointer (often a home-made one.)

Fwiw, there's a signage in the tagaytay area that says: "We make furnitures and antiques." hehehe 😉 😉

 
Posted : 01/03/2011 1:17 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Wood Cutter or Wood Cutting Service

sashes I know are the legs of the staircases Owyn, mostly turned... I could be wrong though 😀


click my signature and it will take you there........

 
Posted : 01/03/2011 1:24 pm
Page 1 / 2
Share: