I had the chance to try my hand at Jay's Bosch 4100 table saw, and needless to say how impressed I am with its performance, I decided to get my own with the gravity rise stand.
I want to give myself a chance to give it a whirl before I start making a review on it. but initially, it is getting good results from me.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
what separates this table saw from Makita, Jet and Torq is the true riving knife. others only have a splitter and will have to be removed when doing non thru cuts which is a cause for kickback.
here the splitter is shown rising above the blade.
configured as a riving knife, the splitter can be lowered by releasing a knob near the blade side tool free and would allow non thru cuts with safety in mind.
and the smart barrier assembly has a fork like metal stop, that limits your hands from getting into the blade, but you do have to set the blade to the correct height for it to be effective.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
sir, idea naman where and how much one like that would cost??
ganda eh.
EdGES Drywall and Ceiling Specialists[COLOR="Orange"]
Re: Bosch 4100-09 Tablesaw, and now there are two
sir, idea naman where and how much one like that would cost??
ganda eh.
where CPO Bosch online... how much, I got it at USD630.00 plus USD165.00 for shipping... almost 800 US dollars.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
where CPO Bosch online... how much, I got it at USD630.00 plus USD165.00 for shipping... almost 800 US dollars.
That's a good price for the (arguably) best portable contractor saw in the US market.
Now let's see some custom made accessories from the Master Jig Builder.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Bosch 4100-09 Tablesaw, and now there are two
my first crosscut sled build.
made runners from edge band materials. handplane to size (snug fit)...
raising the runners with coins, I then added drops of superglue on the runners, I laid my board on top using the fence to make it square and at the prefered area.
clamped until dry with very little force.
as soon as it dried, I screwesd the runners in place.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
my first crosscut sled build.
made runners from edge band materials. handplane to size (snug fit)...
raising the runners with coins, I then added drops of superglue on the runners, I laid my board on top using the fence to make it square and at the preferred area.
clamped until dry with very little force.
as soon as it dried, I screwed the runners in place. well the runners weren't as long as I prefer, but they were the only ones that I have at the moment.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
raised the blade making sure that it is suppoted by clamps
I later screwed the lower guide with one screw so I can adjust using a tri-square...
I the added the front guide just for support and made the complete cut.
made my first cut and, Wow, perfect on the first try...
that made my day... made several more cut just to establish a side and the all came square. the runners were perfectly snug and has no play. naka-chamba ako. hehehehe
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
Nice saw there Timber. I'm just curious is it that much more expensive to buy from the local distributor, or isn't there one?
Re: Bosch 4100-09 Tablesaw, and now there are two
Nice saw there Timber. I'm just curious is it that much more expensive to buy from the local distributor, or isn't there one?
there isn't one...
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
made from the best materials I can find in my shop. for use with the TS...
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
here is the giveaway picture...
I will still have to reference the cut, marked with the Incra T-rule..
so today, I made the cut and aligned the jig to the base and screwed it together.
made a test piece to check its spacing...
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
whaaa! they fit on the first try.
must be a fluke due to the stock thickness (3/8" thick only) so I made another test cut. this time on 1/2" plywood.
just like the 1st one. they do fit great. snug as a bug but not too tight.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
from Violaine
finally finished the 4100 table..the stand that came with the unit isnt practical for me to use..my intention is to make my workbench as the outfeed table when cutting wide pieces...the stand in the meantime will occupy one corner of the dungeon.
consisted of 3/4 ply with supports butt jointed and glue here and there sparingly..joints are supported by 2" drywall screws..primered with acrylic putty and the 3 coats of acrylic weather proof paint (brick red, a roof paint actually)..four locking casters in place..need to install three more at the midsegment.
the empty space on the right will occupy the 2000 watt transfomer while in the other i will make a drawer for the TS accessories.
havent finished the solid wood trim though.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and now there are two
from beebeenator:
sweeeeet 🙂
click my signature and it will take you there........