Re: bosch 4100 table saw dust port
You mean it's not movable? When I RIP long pieces I just pull my saw and RT ( outfeed support ) away from the wall and sometimes facing the open door. I don't think my shop is any bigger than yours. I'm even thinking to put most of my stuff on wheels. Even the workbench and the tools rack.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: bosch 4100 table saw dust port
thanks bro..i need all the motivation in this world.
with a tummy that is constantly aching, i simple cannot push myself to the limits like before..in fact i stopped right away this morning when suddenly, there was a brief pricking pain right there..ninerbyos nako..thankfully it lasted only about 30 seconds..
huhu
The more reason why we should be thankful and make everyday count 🙂
Re: bosch 4100 table saw dust port
parang gusto ko ng kumuha ng 4100 ah hmmm i think I'll put in to my wish list na heheeh;)
ang masasabi ko lang eh, order while the price is good...
click my signature and it will take you there........
Re: bosch 4100 table saw dust port
[HTML]You mean it's not movable? [/HTML]
eh pede naman hilahin i-unlock ko lang yung casters..hehe
The devil will find work for idle hands to do.-Morrissey
Re: Bosch 4100-09 Tablesaw, and then there are Three
merged outfeed and infeed thread relating to the Bosch 4100...
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and then there are Three
Doc, I saw your 4100 sporting a Dewalt blade. well I just installed my new Freud DX1040 blade and wow, am I impressed. It has never cut that smooth ever! then I remembered your Jet TS sporting a Freud too which made me wonder why is your 4100 is using a Dewalt blade.
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and then there are Three
excuse the shameless ad Doc, but its a good time to buy the P410. the price is right!!!
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and then there are Three
Doc, I saw your 4100 sporting a Dewalt blade. well I just installed my new Freud DX1040 blade and wow, am I impressed. It has never cut that smooth ever! then I remembered your Jet TS sporting a Freud too which made me wonder why is your 4100 is using a Dewalt blade.
Bro did you tune the saw again as a result of installing a 0.098" kerf Freud no need to re adjust.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Bosch 4100-09 Tablesaw, and then there are Three
Bro did you tune the saw again as a result of installing a 0.098" kerf Freud no need to re adjust.
I just eyeballed it Jay, it needed no adjustment for the knife, I did not however check the ruler markings if they are still spot on though...
it was a pleasure to use, it cuts plywood and solid stock like butter...
click my signature and it will take you there........
Re: Bosch 4100-09 Tablesaw, and then there are Three
[HTML]Doc, I saw your 4100 sporting a Dewalt blade. well I just installed my new Freud DX1040 blade and wow, am I impressed. It has never cut that smooth ever! then I remembered your Jet TS sporting a Freud too which made me wonder why is your 4100 is using a Dewalt blade.[/HTML]
hehe i didnt really know why i removed the red blade for a 32 cheap yellow blade when i made that recess for the clamp rack!
the stock jet blade added more problem to the tool so i changed it to freud and somehow it did improve the performance. but the jet was just a clunky machine.so make it attractive, i sold it with the red blade stuck to it.
what should i do with the jet blade kaya? it has a 30mm arbor opening.frees bee?:p
yeah...this is the right time to get the fusion blade!
The devil will find work for idle hands to do.-Morrissey
Re: Bosch 4100-09 Tablesaw, and then there are Three
Lurking on your discussion, can't help but drool about this TS . Is it available locally?
Re: Bosch 4100-09 Tablesaw, and then there are Three
Unfortunately, it is for the US market consumption thus it could only be availed from the US as well.
Re: Bosch 4100-09 Tablesaw, and then there are Three
Darn. I'd hate to have a portable device in 110V.
Re: Bosch 4100-09 Tablesaw, and then there are Three
I don't think its really that portable, so lugging a stepdown transformer may be just a little inconvenient.
Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.
Re: Bosch 4100-09 Tablesaw, and then there are Three
I just eyeballed it Jay, it needed no adjustment for the knife, I did not however check the ruler markings if they are still spot on though...
it was a pleasure to use, it cuts plywood and solid stock like butter...
Thanks Timb. I guess I know now that there was no mistake on my part to at least get a Freud Diablo for my 4100. I'll be receiving it anytime now.
I'm happy. 🙂
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
