Another nailer to add to my old but trusty nailers...the hitachi koki nailer
good thing about it is its relatively lightweight with and some features absent in my old nailers.
1. a brad magazine window
2. a single sequential actuation mechanism
The devil will find work for idle hands to do.-Morrissey
Re: Pneumatic Brad nailers
3. tool free jam freeing mechanism
which is absent in my old chiwanese nailer (mind you..this has been my workhorse since 2000 and it never jammed ever..)
4. soft latching mechanism to release the brad magazine cover
The devil will find work for idle hands to do.-Morrissey
Re: Pneumatic Brad nailers
i would have preferred a lower psi working pressure
i replaced the stock connector with a swivel type one..problem is...its longer and wont fit the connector. i think i need to cut it to length via the angle grinder with a slim cutting disc.
my trusty steed parked on handclamp!
The devil will find work for idle hands to do.-Morrissey
Re: Pneumatic Brad nailers
i would have preferred a lower psi working pressure
i replaced the stock connector with a swivel type one..problem is...its longer and wont fit the connector. i think i need to cut it to length via the angle grinder with a slim cutting disc.
my trusty steed parked on handclamp!
V ... Use a Milton Kwik Change M Style 1/4" ( S715 ) Coupler available at LYS or Yale Hardwares.
I'm not sure that it won't leak if you cut it.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Pneumatic Brad nailers
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Pneumatic Brad nailers
The older model Acme works too ... I got this from Panda quite sometime ago. I don't know why their new stock is not fitting.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: Pneumatic Brad nailers
just curious, can you actually shoot nails like a dart from a brad nailer....
Re: Pneumatic Brad nailers
just curious, can you actually shoot nails like a dart from a brad nailer....
Yes, if you bypass the safety feature.
There's a protruding part at the tip of the gun. The workpiece presses against this and this action releases the "trigger safety".
The first time I used my nailer I thought I got a lemon from Harbor Freight. Akala ko sira yung trigger. I was expecting it to shoot nails in the air. Took me 10 minutes to figure it out.
Re: Pneumatic Brad nailers
nice info... pwede siguro gawin sticky na rin tong thread na to....
click my signature and it will take you there........
Re: Pneumatic Brad nailers
Yes, if you bypass the safety feature.
There's a protruding part at the tip of the gun. The workpiece presses against this and this action releases the "trigger safety".
The first time I used my nailer I thought I got a lemon from Harbor Freight. Akala ko sira yung trigger. I was expecting it to shoot nails in the air. Took me 10 minutes to figure it out.
Hehe had the same experience with my skil nail gun. Kala Ko nga lemon siya 😀
Sent from my GT-N7100 using Tapatalk
