Forum

Share:
Notifications
Clear all

Shopmade 12 Jointer

45 Posts
14 Users
0 Reactions
206 Views
(@balarila)
Posts: 1368
Noble Member
 

Re: Shopmade 12" Jointer

Been lurking in this thread since it started and still awed.

We're almost neighbors. How about I let you use my bandsaw if you let me flatten some planks?:)

 
Posted : 10/11/2011 4:47 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Shopmade 12" Jointer

Been lurking in this thread since it started and still awed.

We're almost neighbors. How about I let you use my bandsaw if you let me flatten some planks?:)

hmmm, now that sounds like a good deal to me........


click my signature and it will take you there........

 
Posted : 10/11/2011 5:05 am
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Shopmade 12" Jointer

id like to really see it in person and be awed further.

kelan ba tayo eb jan????

:knit:

The devil will find work for idle hands to do.-Morrissey

 
Posted : 10/11/2011 5:57 am
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

Thanks to all of you guys, I owe you all for the inspirations you gave me.

@JayL

Thank you very much.

Phenolic? Granite?...sounds good, mine are HDF boards I bought from Japan Surplus stores from their broken/unsold cabinets..they are a lot lot heavier than MDFs. I still have one door left for my RT rebuild.

Total Cost: P8,750

EB? ah eh.....sikip eh;)

 
Posted : 10/11/2011 8:43 am
rosy
 rosy
(@rosy)
Posts: 4307
Member
 

Re: Shopmade 12" Jointer

Bro Armand,

One of this days bro I have to see that newly built 12" jointer of yours, to have an 8" jointer is already great but having a 12" , wow that's awesome !!!!!!!! Siguro bro Armand kung matuloy lakad natin nina jonathan at joey81 papunta kay bro willyfernando, maybe we could pass by your place afterwards at makilatis and jointer mo, he he he he , hope its ok with you sana. 😀 :p

Bro hanga ako sa galing mo pati sa link mo kay Wendel Matthias, siguro very proud din sya sa iyo, plus very favorable and positive comments from LUMBER JACKS. :rolleyes:

Again bro Armand, CONGRATS for a job well done !!!!!!! 😉

CIGWELD Weldskill 250 amp Mig Welder
AHP Alpha-TIG 200X welder
HITRONIC 300 Amp DC Inverter IGBT Welder
YAMATO 300 amp AC Stick Welder
YAMATO 200 amp DC Inverter IGBT Welder
DeWALT Chopsaw
HOBART and ESAB Welding Helmets
cloned STIHLs
MS 044 chainsaw
MS 070 chainsaw

 
Posted : 10/11/2011 9:15 am
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

@rosy: no problem, thanks bro.

I check again this morning his website, wala na yung link sakin at picture ko..:frown:..tinanggal nya na. Nagtanong pa sya kagabi kung wala akong suliranin sa kalog ng belt. Sayang daw di nya naisip yung spring sa ibabaw at yung dalawang turnilyo dun sa motor.

 
Posted : 10/11/2011 9:38 am
(@balarila)
Posts: 1368
Noble Member
 

Re: Shopmade 12" Jointer

I have the same thicknesser, Armand (which we are talking aboutin a separate thread).

And I'm green with envy over your jointer. I have lots of slightly bowed raw lumber that could use a long and wide jointer.

Now, I'm thinking, if I replace my Ryobi's infeed and outfeed flip-out trays with long metal planes and somehow make them perfectly aligned with the base underneath the planer blades, maybe I could have me a combination jointer-thicknesser.

You think this would work?

 
Posted : 22/11/2011 5:27 am
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

I have the same thicknesser, Armand (which we are talking aboutin a separate thread).

And I'm green with envy over your jointer. I have lots of slightly bowed raw lumber that could use a long and wide jointer.

Now, I'm thinking, if I replace my Ryobi's infeed and outfeed flip-out trays with long metal planes and somehow make them perfectly aligned with the base underneath the planer blades, maybe I could have me a combination jointer-thicknesser.

You think this would work?

Ding, this was discussed in this[COLOR="blue"] thread. I saw the jig that Timber mentioned but can't find the website anymore.

 
Posted : 22/11/2011 9:30 am
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

Ding, check this out: [COLOR="Blue"]Jointing with Thicknesser

 
Posted : 22/11/2011 9:39 am
(@balarila)
Posts: 1368
Noble Member
 

Ding, check this out: [COLOR="Blue"]Jointing with Thicknesser

Thanks, Armand. That's a very helpful site. I can see another project for me on the horizon. I don't think I can ever afford a proper jointer so will have to make do with a "jointing thicknesser".
Posted via PHM Mobile

 
Posted : 22/11/2011 10:44 am
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Shopmade 12" Jointer

Hello bro Armand, we were talking about your jointer last night and we we're all wondering if you have a video of the jointer's jointing accuracy. TIA! 🙂

For more of the latest tools, deals and tips - click HERE

 
Posted : 22/11/2011 11:36 am
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

@jarod:
Lately i've been dimensioning guijo for the legs of my entry way table project, checked the jointed sides and looks perfect when putting the 4 legs side by side.

I haven't tested my jointer the way you want, all i've been doing is flattening some boards. Do you want me to joint edges of two boards and glue them up after? How long the boards?

 
Posted : 22/11/2011 11:59 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Shopmade 12" Jointer

how about some 1 x 6 x 48" jointed together sound? Tamang tama lang for a table top build....


click my signature and it will take you there........

 
Posted : 22/11/2011 12:30 pm
Armand
(@armand)
Posts: 837
Prominent Member
Topic starter
 

Re: Shopmade 12" Jointer

how about some 1 x 6 x 48" jointed together sound? Tamang tama lang for a table top build....

How did you know the exact size of my project?:confused::confused::p:

Tamang tama Timb I have 1x8x48 gmelinas, so 1x8 and 1x4 to make 1x12 is good?

 
Posted : 22/11/2011 12:52 pm
jarod
(@jarod)
Posts: 1222
Noble Member
 

Re: Shopmade 12" Jointer

Ikaw na bahala Armand...gusto ko lang muna makita yung performance bago ko pick-up-in yung jointer ko na pinagawa ko sa'yo 😀 😀 😀

For more of the latest tools, deals and tips - click HERE

 
Posted : 22/11/2011 2:40 pm
Page 3 / 3
Share: