Forum

Share:
Notifications
Clear all

thicknesser and jointer desire

71 Posts
12 Users
0 Reactions
273 Views
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

I am oogling on the JET jwp-12

its selling at hanstools for 20K

i am calling PANDA .. ok i just got off the phone its 14,770 pesos!!!

Umm.. if a hanstools person is here he may kill me.

As for the jointer, there is no JET available at Panda and the one in Hanstools is johnson elektric brand at 14,500.

Any body here has a jointer or planer ? It woiuld be really helpful if you guys give us your insights and impressions on them.

I need one of each since i plan on generating some sort of small income from this sideline so right now i am looking alot on the bottom line.

 
Posted : 26/04/2010 5:28 pm
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

Re: thicknesser and jointer desire

chiwanese Johnson Electric 1502

14,500 bought at hanstools. Reason? a guaranteed 3 months warranty and i was amazed they had a scrap wood for me to run it throigh.... funny thing was the sales rep was about to do it on my behalf. He retracted the blade guard and was about the place the stock on top of the blade in the middle of the cutting width of the blade and i went STOP!!!!!! 🙂 so many blood splattering or blunt forced trauma scenario flashed before my eyes.

As with chiwanese tools the assembly has some issues but was resolved in the shop. The blade barrel was scraping at an aluminum guard inside the machine, i think its the guard that directs shavings to the dust port.

 
Posted : 29/04/2010 9:00 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
 

Re: thicknesser and jointer desire

I was just there Bee at around 12. It was still there I think ... either you came after me or they had another on stock!?

Looked pretty solid to me though to be honest I did not like the fence.

 
Posted : 29/04/2010 11:22 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: thicknesser and jointer desire

do they have available blades for this? let us know how it goes.


click my signature and it will take you there........

 
Posted : 29/04/2010 11:31 pm
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

Re: thicknesser and jointer desire

They use a makita planer blade. I see the blade in wilcon

Fence is a little on the short side, can be beveled. Can probably fit a larger sacrificial fence, over the existing one for more height

I got the item at 3ish 🙂

 
Posted : 30/04/2010 7:00 am
(@telecaster)
Posts: 28
Eminent Member
 

Re: thicknesser and jointer desire

hi guys im new here

is this good enough for 20" long 8" wide pieces?

 
Posted : 02/05/2010 1:11 pm
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

Re: thicknesser and jointer desire

Hi Telecaster, Welcome to the forum!

cant do. its only 6" wide. And i have bad news.

The cutter head is stuck. good thing it didnt fry the motor. it was the same problem we had in the store. But in the store we didnt run it we just rolled the cutter head to see.

I am returning this... sigh

Malas ako sa tools. or sa cheap tools hahaha

 
Posted : 02/05/2010 3:36 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: thicknesser and jointer desire

Hi Telecaster, Welcome to the forum!

cant do. its only 6" wide. And i have bad news.

The cutter head is stuck. good thing it didnt fry the motor. it was the same problem we had in the store. But in the store we didnt run it we just rolled the cutter head to see.

I am returning this... sigh

Malas ako sa tools. or sa cheap tools hahaha

bad beat bro. if you can refund it, it would be better, I can go with you if you are interested in a used surplus jointer(either a Japan or Taiwan made) and very ,very heavy. Hamada ang brand iirc.... it is in Sta. Ana only.


click my signature and it will take you there........

 
Posted : 02/05/2010 4:13 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: thicknesser and jointer desire

How about a Jet jointer? Are these not available locally?

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 02/05/2010 4:52 pm
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

Re: thicknesser and jointer desire

yeah i will try to refund it coz i cant think of anything else they have in their store that i could get.

They did offer me some big ones.

How much does the units you mentioned go for?

 
Posted : 02/05/2010 5:05 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
 

Re: thicknesser and jointer desire

Shouldn't be a problem getting a refund Bee, just do it ASAP.

 
Posted : 02/05/2010 8:10 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: thicknesser and jointer desire

yeah i will try to refund it coz i cant think of anything else they have in their store that i could get.

They did offer me some big ones.

How much does the units you mentioned go for?

the asking was 18K back then, not really sure it is still available, but if it is, I reckon at least 4 people should bring them to your vehicle...


click my signature and it will take you there........

 
Posted : 02/05/2010 10:17 pm
(@beebeenator)
Posts: 1468
Noble Member
Topic starter
 

Re: thicknesser and jointer desire

Thanks Timber

That sounds like its a good deal. Just hope it doesnt blow up a 60amp breaker 🙂

I'll pm you and will adjust on your free time 🙂

 
Posted : 03/05/2010 10:18 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: thicknesser and jointer desire

Bee / Timber

Bro please PM or txt me too if you already have a sched. If I don't have conflict then I can come too. Place is not so far from me.

Thanks

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 03/05/2010 11:55 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: thicknesser and jointer desire

hmmmm, tool hunting trip... yep, that would be fun, maybe we can schedule a trip to Taytay too (wood source, reclaimed and priced well) if I am not mistaken, we'll have to call workbench...


click my signature and it will take you there........

 
Posted : 03/05/2010 5:42 pm
Page 1 / 5
Share: