Forum

Share:
Notifications
Clear all

Ticket To wood Turnings

24 Posts
8 Users
0 Reactions
103 Views
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Been longing to have a lathe I want to put my woodworking skill to the next level, wood turning is very addicting so what the heck I purchase a not so good lathe actually the construction is lame and cheapo so I’m not encouraging you to buy this brand of lathe it happens that I need it to finish my other project but it’s a good start considering there are no well made lathe available locally.

Package contains a 12 inch tool rest, tails stock the lathe has a 36 inch bed and 9 inch swing so I can turn almost all the standard turning.

My first attempt only use a standard ¾ wood chisel.

 
Posted : 10/06/2010 9:30 pm
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

Hard not to have the correct tools to do the job, So decided to visit binondo to get some tools, found 1 and it’s the best its an Marples 8 pcs wood turning tool England made not cheap but worth it.

Also be needing a outside diameter woodturning caliper and grab the Proto brand US made.

The Marples handle is made up of Ash the wood favorite for making baseball bats, no turning back now its wood turning for me wish me luck

 
Posted : 10/06/2010 9:31 pm
timber715
(@timber715)
Posts: 5424
Member
 

Re: Ticket To wood Turnings

Marples are some of the best ones to have, better if you can find Sorby's. ako, will wait for the Jet, if and when they come... congrats on the new toys...


click my signature and it will take you there........

 
Posted : 10/06/2010 10:16 pm
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

Been waiting also for jet to arrive but I guest Edward do not want to gamble been talking to him and he computed it will 30 k more or less to have the jet lathe also the band saw hope you can pursue him

 
Posted : 10/06/2010 11:15 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Ticket To wood Turnings

How much is the proto caliper Chisel? tks

Congrats on the lathe bro. I'm sure this tool will go well with your designs.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 10/06/2010 11:27 pm
bbn
 bbn
(@bbn)
Posts: 904
Prominent Member
 

Re: Ticket To wood Turnings

Congrats bro. I have one of those too and a set of Delta knives. Mine though doesn't work too well at the full length so I've always only used half the bed. Jet has a cast iron bedway, much more solid than the steel tubes of our lathes, much more expensive though I'd expect.

 
Posted : 11/06/2010 12:07 am
timber715
(@timber715)
Posts: 5424
Member
 

Re: Ticket To wood Turnings

Been waiting also for jet to arrive but I guest Edward do not want to gamble been talking to him and he computed it will 30 k more or less to have the jet lathe also the band saw hope you can pursue him

yeah, told him as long as it isn't DIY (entry) level stuff, 30K is a decent price that even I wouldn't mind paying. Jets has some really nice bandsaw that works spectacular for resawing...


click my signature and it will take you there........

 
Posted : 11/06/2010 1:49 am
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

How much is the proto caliper Chisel? tks

Congrats on the lathe bro. I'm sure this tool will go well with your designs.

Jay i got it from Yale 600php original price is 980php, and thanks bro

 
Posted : 11/06/2010 7:22 pm
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

Congrats bro. I have one of those too and a set of Delta knives. Mine though doesn't work too well at the full length so I've always only used half the bed. Jet has a cast iron bedway, much more solid than the steel tubes of our lathes, much more expensive though I'd expect.

Yes Bbn you are correct because of the lousy construction you have to modify some parts for example the head stock should be rigid so I’m planning to weld some support bar on it

 
Posted : 11/06/2010 7:27 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Ticket To wood Turnings

Jay i got it from Yale 600php original price is 980php, and thanks bro

Thanks bro. I was actually thinking about these before I saw your post. Did you happen to see if they had the inside caliper too.

Pics borrowed from GJ.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 11/06/2010 7:41 pm
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

Definitely Jay they have it Japan made and US, just not familiar with the caliper so I don’t know what brand is the best but as any tools well made it doesn’t come cheap may be next week I have to come back there to get an inside caliper.

 
Posted : 11/06/2010 8:07 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Ticket To wood Turnings

Proto is a real good brand. The Industrial arm of Stanley.

I noticed that what you got did not have the Top Handle. I would prefer one that have this so I can hold it like a compass.

Please let us know what you find next week.

Thanks

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 11/06/2010 8:32 pm
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

I’m attempting to turn fenial using the lathe, rip 1 3/8” palo china square.

Almost done when the wood gave up and snap, had to redo my work.

Now I’m being care full not to put too much force, using a gouge I carefully work my way.

With the aid of caliper I size the dowels.

 
Posted : 27/06/2010 11:03 am
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

It’s a spindle now I have to make another one it goes in pair.

Having hard time replicating but it comes out ok.

 
Posted : 27/06/2010 11:08 am
chisel
(@chisel)
Posts: 471
Reputable Member
Topic starter
 

Re: Ticket To wood Turnings

Stain it with dark walnut and its ready for installation.

 
Posted : 27/06/2010 11:11 am
Page 1 / 2
Share: