My basement has been gathering dust (not saw dust)
damn... been really tired lately and couldnt find time to do two of my joys woodworking and watches.
but my bro just came from the US and brought goodies!
1.) Peltor earmuff, their highest rated non-electronic ear muff! 19.95$ sa AMAZON!
2.) Veritas mkII honing guide with skew registration and camber roller!!!! - finally decided to invest
3.) 3 in 1 brass marking guage from lee valley
4.) Freud thin kerf combi blade, Sayang hindi ko binili yung the other Freud blade that JayL posted a few months back.... ang mahal kasi.
5.) 2 engineering squares 3" and 4" from lee valley
6.) uhhhhhhhhhh meron pa eh.... cge cge check ko mamaya then will post the goodies 🙂
hopefully i will be back regularly!
Re: tools from my bro that came from the states (pics to follow)
My basement has been gathering dust (not saw dust)
damn... been really tired lately and couldnt find time to do two of my joys woodworking and watches.
but my bro just came from the US and brought goodies!
1.) Peltor earmuff, their highest rated non-electronic ear muff! 19.95$ sa AMAZON!
2.) Veritas mkII honing guide with skew registration and camber roller!!!! - finally decided to invest
3.) 3 in 1 brass marking guage from lee valley
4.) Freud thin kerf combi blade, Sayang hindi ko binili yung the other Freud blade that JayL posted a few months back.... ang mahal kasi.
5.) 2 engineering squares 3" and 4" from lee valley
6.) uhhhhhhhhhh meron pa eh.... cge cge check ko mamaya then will post the goodies 🙂hopefully i will be back regularly!
Bee, Did you get any sharpening stones for the Veritas? I've been wanting to get this honing jig for a long time now but haven't decided on the stones yet. Would it work with sand paper? The stones are expensive too.
Looking forward for the pics. Congrats bro. Always good to have new toys. 🙂
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: tools from my bro that came from the states (pics to follow)
The veritas honing jig works with sandpaper..that's what i use and still get good results..
Re: tools from my bro that came from the states (pics to follow)
The veritas honing jig works with sandpaper..that's what i use and still get good results..
Where to order? I'll get one for my next box and is the camber kit necessary?
The stones will have to wait as I don't have a planned budget for these. Probably more expensive than the honing jig itself.
Thanks Moji.
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: tools from my bro that came from the states (pics to follow)
Bee, Did you get any sharpening stones for the Veritas? I've been wanting to get this honing jig for a long time now but haven't decided on the stones yet. Would it work with sand paper? The stones are expensive too.
Looking forward for the pics. Congrats bro. Always good to have new toys. 🙂
The Veritas should be ok with sandpaper, you can get a locally 1000 grit waterstone for around 1k.
Dumb mistakes will always be dumb mistakes, unless . . . . you learn from it, and then it will be learning experience.
Re: tools from my bro that came from the states (pics to follow)
You can get the honing guide from Lee Valley. The camber roller just makes it easier to hone blades with camber on them although you can still hone a camber without the roller. Also if your not the type to use camber on the blades then it would be useless.
Re: tools from my bro that came from the states (pics to follow)
:home:Welcome back Ben, heed the calling of the woods.
Re: tools from my bro that came from the states (pics to follow)
The Veritas should be ok with sandpaper, you can get a locally 1000 grit waterstone for around 1k.
Ordered the Jig. Free shipping. Will check this stone when I get chance.
Thanks
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: tools from my bro that came from the states (pics to follow)
5.) 2 engineering squares 3" and 4" from lee valley
Curious to know if the engineering squares are actually Soba ... what Panda sells, claimed to be made in India. They look the same.
Re: tools from my bro that came from the states (pics to follow)
Curious to know if the engineering squares are actually Soba ... what Panda sells, claimed to be made in India. They look the same.
Do you have the Lee Valley links Guad?
Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS
Re: tools from my bro that came from the states (pics to follow)
12 inch freud combi blade
goodies!~
Re: tools from my bro that came from the states (pics to follow)
Bee, Did you get any sharpening stones for the Veritas? I've been wanting to get this honing jig for a long time now but haven't decided on the stones yet. Would it work with sand paper? The stones are expensive too.
Looking forward for the pics. Congrats bro. Always good to have new toys. 🙂
Ill be using the scary sharp method on the sand paper, its cheaper and dont need to worry about the depression problem a stone has
Re: tools from my bro that came from the states (pics to follow)
Curious to know if the engineering squares are actually Soba ... what Panda sells, claimed to be made in India. They look the same.
Oops i threw away the boxes of the squares, but it is indeed SOBA 🙂
Re: tools from my bro that came from the states (pics to follow)
Nice stuff! what pocket knife is that?
Re: tools from my bro that came from the states (pics to follow)
Do you have the Lee Valley links Guad?
Woodworking / Marking / Try Squares / Engineer's Squares
In comparison,
3" - P520
4" - P530
6" - P640
8" - P1,340
10" - P1,750
12" - P2,230
Just saw a review that also confirms that they are Soba.