Forum

Share:
Notifications
Clear all

Whiteside Router Inlay Kit

6 Posts
3 Users
0 Reactions
47 Views
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

lets play a bit... (pun intended)

having some minutes of free time, I decided to try the inlay kit. it starts by making a pattern out of scrap plywood, a little scrollsaw work and its ready to use.

I start with the spacer removed and started to cut the inlay.
with double stick tape and everything secured.

making the pattern in several cuts...


click my signature and it will take you there........

 
Posted : 29/07/2010 10:46 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Whiteside Router Inlay Kit

then without changing the depth adjustment on the router, I started cutting the recess, of course with the spacer on the inlay kit installed. I then cleaned it with a chisel to give the bit more life.

again with the chisel I cut the edges of the recess to receive the inlay. my mistake was it went in very tight during test fitting that I had to pry it out with a cutter knife and sanded a bit of the very thin veneer off. but all in all it came out fine...

would I recommend it? I give it a 9/10 for performance and ease of use, 9/10 for construction and built and 8/10 for price.


click my signature and it will take you there........

 
Posted : 29/07/2010 10:53 pm
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: Whiteside Router Inlay Kit

Will that Whiteside Kit work with any router say a Bosch?

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 29/07/2010 11:04 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Whiteside Router Inlay Kit

Will that Whiteside Kit work with any router say a Bosch?

it works with all routers Jay, but some require a porter cable template bushing like the one on my router.


click my signature and it will take you there........

 
Posted : 29/07/2010 11:08 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: Whiteside Router Inlay Kit

very nice inlay kit bro!

The devil will find work for idle hands to do.-Morrissey

 
Posted : 30/07/2010 11:22 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: Whiteside Router Inlay Kit

very nice inlay kit bro!

It is Doc, and there is hardly a learning curve for it....


click my signature and it will take you there........

 
Posted : 31/07/2010 12:28 am
Share: