Re: Kitchen Cabinet Nagbalat suha, possibly two things: Malapot ang pintura or ung roller. Try nyo po gamitin ung painting pads. I saw once in a ...
Re: Kitchen Cabinet Final Coat Semi gloss enamel After 4th coat... sand with 400 sand paper and Apply wax and buff the surface. ...
Re: Template making will i just do that in the edge of my wood? i don't really get it.. sorry.. do you really want to be a woodworker? ...
Re: Home Automation - Open Project Nick The LE1 is expensive 🙂 ... the cost of 1 slave node I'm planning on doing is around 350.00 pesos, ...
Re: Home Automation - Open Project found this at ebay... price around 6 US dollar... its cheap 🙂
Re: Home Automation - Open Project Hi Boo, I can do all the electronics parts of this home automation project... i'm an electronics engineer and ...
Re: Template making there.. I'm having a hard time on making it squared.. Ok... using your router and a straight bit, clamp a guide ra...
Re: Template making Hi gcl 2310, can you post some photos of the template that you want to do? it will help us here to visualize the things that ...
Re: Kitchen Cabinet @ fortnapz yes, every part of the cabinet was painted outside the house... before painting, I pre installed the cab...
Re: Kitchen Cabinet After poliftuff. Painted Flatwall enamel (primer)... My drying area... eto yung sinasabi kong drying area kaya hin...
Re: Kitchen Cabinet After the filler dries, Light sanding on the filled area... done sanding.
Re: Kitchen Cabinet mix mix mix... And i'm done
Re: Kitchen Cabinet After Sanding... Applied Polituff to deep imperfections on the cabinet doors. Before applying filler... make sure to rem...