Gamit ko nga pala laquer based paints... mey vary dependeng on the type of paints. @ adzz... for mix ratio for paint and thinner... wala akong st...
@ode... bracing lang nilagay ko dyan... then tornilyo and tox sa pader... hindi ko napicturan... post ko dito kapag nakauwi ako samin. @bugel... gaw...
floating shelves na lang... at matatapos ko na rin.
eto pa... eto na...
laquer primer then final coat of black for the black drawers... then water white clear gloss laquer after applying clear gloss laquer
drawers finishing process the same as the above... here are some pics... after laquer putty and sanding with ROS with grit 240
@sir armand... salamat pero hindi naman ako magaling... sakto lang... @newsboycap... your welcome brother... popost pa ako ng photo dun sa fini...
before spraying top coat, check viscosity of the paint... using mineral water bottle. para saking spray gun 13-15 secs binibilang ko para ok na a...
eto pa... after hand sand... spot spray with laquer primer yung mga mey polituff lang. then apply laquer spot putty and sand with grit...
eto pa... sand top surface and side.. this time using ROS(random Orbital Sander) with 120 grit. apply polituff on deep imperfections. ...
Dry fit all drawers... after adjustment...testing forgot take pic on the trim process using router...
@nick and boo: I have new technique in applying lacquer putty: Mix a small amount of fula tite sa lacquer putty, about 75-25 ratio, then add...
thanks sir armand and sir boo... used laquer type paints and clear gloss laquer ang last coat... procedure ko - sand ng 120 grit using ROS ...
By the way sir armand thanks for the tip on posting photo... gaya lang din pala ng dati... kaso ngayun, kailangan itype
Drawer part...
