:welcome: Welcome to PHM bro and enjoy your stay !! :whistle:
If you will paint a flat wall enamel as a primer then finish it also with an enamel top coat. Enamel to Enamel. if you will use latex non gloss as p...
A 5" X 8" or 10" with 1/4" thick metal surface. May I suggest you consult a structural engineer so that you will get the proper advice and/or sugge...
I Beams (H Beams) would be another alternative. They can easily be welded on top of the posts rebars with metal plates provision.
May I know the dimension of your planned car port, is it for a single car or for a two vehicle car port. Anyway I'd rather use for my bottom cord...
@ lazyworker26, First of all, can you first introduce yourself being a new member of PHM. At the lower portion of the index page just below the G...
No problem there, sometimes in my case I apply 3 to 4 times of the primer to really cover and isolate the metal before the final finish. 😉
Yes it will greatly reduce the extreme heat coming from the galvanized roofing. I'm saying this coz I've gone and been in the same situation before....
I have not understood your language please use English language and home improvement damp surveys Hampshire is best for home renovation abbie, ...
OK lang kung nag karoon muli ng kalawang yung metal, kung wala naman eh oks lang. Wipe off the white dried solution with a rag from the metal then y...
Yes Armand, very nice wine boxes project ! :2thumbsup::agree:
There are lots of cheap and affordable power tools in the market, yes they are cheap and very affordable but..... they will not last long and would ...
Looks like its been stick welded but hard to tell if its a good weld or not since its all covered up already with paint. 🙂
:attack: Go Go Go, the choice is yours and good luck on the purchase !!! :2thumbsup:
