This is the first side. :whistle:
Almost forgot to share some pics and it concerns welding the triangular supports under the angle bar, the portion that bends the sheet metal. ...
Thanks bro bakman. 😉
Found the tray to be so simple so I added some flare on the back corners. Made and welded some scrolls. Then installed the flooring, its just some e...
After which I added some flat bar support for the flooring that I will install, then started cleaning the welded project. :whistle:
Then started welding the stands to the corners of the Tray frame.
Welded all the joints and grinded each corner to produce a round and soft corners. 🙂
Started working on the each stand.
Started working on welding the middle bolt control so to prevent some sort of brake movement and warping. Also showing how I welded the angle bar to...
And then attached and welded the bolts at the top end of the I Beam. Installed the springs and the whole brake attachment.
I decided to apply 2 coats of red oxide metal primer on the top side of the flat brake and the inner part of the angle bar to prevent rusting in the...
Just the same procedure as with the first end. What I forgot to record and take some pics is the back side of...
After working on the two angle bars, drilled holes for the bolt and polished with a flap disc, decided to assemble the main brake. ...
