[img2=json]{"data-align":"none","data-size":"custom","src":"http://i1064.photobucket.com/albums/u378/sygui2/metal%20sheet%20bending%20brake/gedc0209_z...
Well this is another part of the brake that I have to work on. Cut some 3" X 3" angle bar of 3 3/8" wide. I need a thicker angle bar so these two will...
HEHEHE, actually bro I have been doing metal works continuously last year working on my welding cart which is nearing completion plus other small proj...
And the two other plates that were full welded had the same outcome.
Now working on the brake, my 3" width flat bar is kinda short in width for the angle bar that will seat and be welded on top so I decided to cut som...
Decided to cut some triangular gussets as support under the angle bar to prevent future movement/warping during the process of bending thicker sheet...
This is how I cut the end of the angle bar where my hinges will seat and be welded. The hinge will sit on top of that portion w...
Then cut my 2.5" X 2.5" angle bar to 58", same length as the I Beam for which I cut a small portion of the end tips of the angle bar to fit my hinge...
And for my HINGES : As for my hinges, I used an old 3/4" BI pipe with 1/8" thickness as the bushing and then bought a sha...
This is the I Beam that will be my main base. Got my 5" angle grinder and fitted it with a cup brush to clean and remove some old paint and rusts. ...
I thinks its two or three coats of the Ceramicoat. 🙂
thanks po. after rust converter, para po kasing hindi fine yung iron surface. useless po ba yung rust converter if mag apply sandpaper ? Th...
Welcome Lyle to PHM forum and thank you for your introductions ! :welcome1: Well most of us if not all would start with small projects and repairs ...
