And the first weld pass : And the second weld pass :
And to continue with the same corner of the angle bars : Again here I will start my weld on the outside edge of the...
A very simple tip before applying the full welds on the butt joints which may serve very useful. Before applying yo...
TACK WELDING ON THE CONNECTING JOINTS : The tacks made between the 1 X 1 and 2 X 2 angle bars. These tac...
Welded some cross bar support on each corner to secure squareness then tacked each connecting joints : :cool01:
The fit ups of corners are perfectly squared and can easily be welded.
Thanks V as always for the encouragement. Nice to see you back participating in the forum and giving very useful tips to newbies in woodworking. :a...
WORKING ON THE FRAMES OF THE DRAWER: This is another stage working on the frames of the planned drawer for my welding accessories and what eve...
Of course bro meron yan but for now I am using a temporary nail lock kasi lagi ko pang inaalis yung rear wheels and the front casters when welding i...
AND MORE WELDS ON GI PIPES :
AND JUST SOME UNDERSIDE WELDS :
After some few weeks or months of not working on the cart, rust started to creep in on the metal surface and have to do some de-rusting by using my De...
Still working on the cart. Welded some 1 1/2" GI pipes for the rear verticals and 1 1/4" GI pipes for the horizontal and supports. Encountered some pr...
I have a spotlight directed toward the direction of what I will be welding. I even have a mini LED spotlight attached on top of my helmet. :D:barmy:
HOW THE PLATES WERE WELDED ON THE FLAT BARS and GI PIPES : Did have some bits of undercuts/or worm holes here...
