Re: Itanong mo kay Doc..(Ask the Doctor) seriously, do you handle chemicals like lacquer? I met someone who said that these chemicals have ...
Re: Drum finishing If you are working from bare wood start w/ grit 220-240 for veneers and grit 100-180 for solid wood. For each coat u must elev...
Re: Drum finishing Good morning, Yes I was happy with the initial results of the test pieces. I did the same thing basically the only differ...
Re: Installing Split Type Aircon Wow, that's very efficient, almost EEI of 14.5. Correct, the official test read 95.2% of the claimed 15.3 ...
Re: Installing Split Type Aircon :pHi All, My sister will be having a split type AC installed. The surveyor said that she needs a 1.5 HP un...
Re: Rust converter for the aircon? Hahaha! LYE or lye flakes i think is caustic soda, i could be wrong. It's always been called Lye & it isn't ...
Re: Rust converter for the aircon? I...Rust converter reacts only with rust, right? The aluminum fins won't be affected, right? They use a ...
Re: Eyeballing Techniques why not try the eyeballing game... Eyeballing, ah, what an experience. You need to make sure flatness is avoided. ...
Re: Yock's Auto Electrical (Cubao) This is sad. I've known Yock's for a long time. And it's recommended by many old hands I know. Even my o...
Re: all about Air Compressors [QUOTE........and used Teflon tape and gasket maker for sealing Thought I'll get done with this today but I w...
Re: all about Air Compressors Here's a good read about compressors. This is definitely a good read Jay. Tnx for the link.
Re: all about Air Compressors Here is what Solberg has to say. The clean pressure drop at 10.3 SCFM (17.5 m3/h) for the FS-06-050 is appro...
Re: all about Air Compressors Air intake filters should match the suction rate of your unit. Check the filters of both models of your choice and ...
Re: all about Air Compressors This is actually the one I want. For now the need is not that urgent as it would be used for DIY only and not for b...
Re: all about Air Compressors @Willy I ordered the Pressure Switch in Grainer just now. I thought it best to keep the compressor replacemen...
