Forum

Share:
Notifications
Clear all

computer desk

14 Posts
5 Users
0 Reactions
71 Views
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

we I have started thus project for a while now stopping every so often as it isn't high priority anyway... it will have two cabinets and a housing for the cpu.


nothing fancy, I just thought I will start using the Kreg joinery mostly on this project.
got the drawers assembled and installed, the side that belongs to SWMBO uses full extensions and my side uses one full extension and three regular slides.

today I start making the false fronts...


click my signature and it will take you there........

 
Posted : 10/02/2011 1:15 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

edge-banding in process.

with some more cleaning up needed, my day ends. so I left it for dry fitting...


click my signature and it will take you there........

 
Posted : 10/02/2011 1:17 am
(@beebeenator)
Posts: 1468
Noble Member
 

Re: computer desk

Timber,

Where did you buy the blue tape?

 
Posted : 10/02/2011 8:20 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

they are a waste of money bee, that is the stanley blue carpenter's tape bought in S&R. they stick where you need it less to stick and come loose when you need them to stick. wouldn't recommend them...


click my signature and it will take you there........

 
Posted : 10/02/2011 11:15 am
(@beebeenator)
Posts: 1468
Noble Member
 

Re: computer desk

ahhhh ic, thanks 🙂

 
Posted : 10/02/2011 11:46 am
JayL
 JayL
(@jayl)
Posts: 5426
Member
 

Re: computer desk

they are a waste of money bee, that is the stanley blue carpenter's tape bought in S&R. they stick where you need it less to stick and come loose when you need them to stick. wouldn't recommend them...

LOL what a way for a tape to be described. No way I'm buying those after this remark.

Millermatic 180 Autoset Mig Welder
Miller Spoolmate 100 Spool Gun
Victor Firepower 350 Oxy Ace Outfit
3M Speedglas 9002X AD Helmet
Makita LC1230 Dry Cut Saw
Ingersoll Rand Air Tools
Snap On Tools
Metabo Power Tools
Norseman Drill Cutting Tools
Bosch Power Tools
3M PPS

 
Posted : 10/02/2011 12:34 pm
violaine
(@violaine)
Posts: 1926
Noble Member
 

Re: computer desk

i see..been looking around forsome painter's blue tape but no success..is that carpenter's tape the same with painter's tape?

been using masking tape for quick glue ups and when painting false basebaords.sometime lucky (it peels without gum residue) and oftentimes not.

can you recommend a brand of masking tape that can be removed easily without leaving gummy residues?

thanks

The devil will find work for idle hands to do.-Morrissey

 
Posted : 10/02/2011 1:17 pm
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

I would like to say 3M, unfortunately it does gum up too especially the older ones... Maybe its time we get a seminar from 3m, they do have lots of great products...


click my signature and it will take you there........

 
Posted : 10/02/2011 1:20 pm
(@beebeenator)
Posts: 1468
Noble Member
 

Re: computer desk

seminar... 3m... ill see what i can do 🙂

Di ba same conglomerate na sila with Stanley?

 
Posted : 10/02/2011 8:24 pm
 guad
(@guad)
Posts: 646
Honorable Member
 

Re: computer desk

There used to be 3 versions of them:
low adhesion (light blue), which I never found useful being too weak
medium adhesion (blue, picture #1 below, "14 day removal")
high adhesion (green, picture #2 below, "3 day removal")

Then they seemed to disappear from stores sometime around 2007-2009.
In 2009, I saw the automotive one (green, picture #3) pop up, but no more blue or green 3M painter's masking tape. Other brands yes, but 3M painter's gone. The automotive green is weaker than the painter's green.

Would like to know from 3M what happened.

 
Posted : 11/02/2011 12:22 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

after a long break from this project, I found time again to continue work on it. got the false face inatalled and was able to choose some nice simple handles.

the top has been halted for material choice and I decided to use some mahogany for the edges... from a 10' slab, I cut several pieces.

milled them to size and cut the profile such as the rabbets then dry fit.


click my signature and it will take you there........

 
Posted : 24/02/2011 12:12 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk


cut the plywood to size and glued them together.

the joinery?

pocket hole joinery lang 😀 this will see the handplane for leveling pa...


click my signature and it will take you there........

 
Posted : 24/02/2011 12:14 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

finally curing the poly and it comes home in anticipation of the Harbies, I decided I post some before pictures first of my audio/wreck room. and all its mess...




click my signature and it will take you there........

 
Posted : 24/03/2011 1:03 am
timber715
(@timber715)
Posts: 5424
Member
Topic starter
 

Re: computer desk

the desk comes home, messy still but much better already.


now my speakers have better room to bring out its music. Low frequencies increase substantially 😀


click my signature and it will take you there........

 
Posted : 24/03/2011 1:05 am
Share: