Forum

MORRIS CHAIR, build...
 
Share:
Notifications
Clear all

MORRIS CHAIR, building a classic.

202 Posts
20 Users
0 Reactions
944 Views
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

jonathan, nice work on the chair, please lang, put spaces before adding pictures para maayos ng konti. I edited them now... next time 😮
congrats anyway, you keep getting better and better.

thanks master, until now i'am having a hard time posting, i guess i need a seminar...:p 😡

getting better kasi magaling ang master.;)

 
Posted : 12/02/2011 5:33 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

I guess Jonathan really got good practice building the workbench. Great clean work now and pics.

in-edit pa nga ni master timber yan eh!

thanks jayL!!!

 
Posted : 12/02/2011 5:34 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

Is this your plan to built right now? :confused:

there are many morris chair plans grandmaster ryobi 😎 like i tell before the ideas are limitless.

i got inspired by gregory paolini's morris chair (minus the bowed arm) i have no bandsaw for a resawing, straight arm i ended up.

thanks grandmaster!

 
Posted : 12/02/2011 5:40 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

@ Jonathan Go Go very nice built kay MORRIS ba yan chair ? nagpagawa sayo ? hindi sya marunong gumawa?

ha ha ha!!! loka loka!!!:p :p

 
Posted : 12/02/2011 5:42 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

a sled to make tenons on the slats

 
Posted : 12/02/2011 5:48 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

the sled in action...

build a push block or sled for the side of the tenon.

 
Posted : 12/02/2011 5:56 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

cleaning it up with a utility knife or sand paper.

 
Posted : 12/02/2011 6:00 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

dry fitting the slats.

 
Posted : 12/02/2011 6:02 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

because i want the arm to have an incline, i'm going to cut the upper edge of the upper rail

somewhat tapering, i'm going to use my tapering jig...these jig i used making my "adirondack

chair", kinakalawang na nga yung mga bolts, at nag cupped na yung plywood... but i still manage

to make tapering cuts.

 
Posted : 12/02/2011 6:11 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

used a blockplane to smoothen the tapered surface

ang tigas pala talaga ng yakal, buti nalang sir timber sharpened all my handplane blades.:p

 
Posted : 12/02/2011 6:17 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

and now for the legs tenon to accept the arms

[IMG] [/IMG

sizing up with a rasp.

 
Posted : 12/02/2011 6:23 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

mortising the arm to accept the legs tenon.

 
Posted : 12/02/2011 6:27 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

cutting the corbels on the rt, used a pattern when cutting.

with a pattern bit, i make the cut.

 
Posted : 12/02/2011 6:45 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

preparing for the glue-ups,
mark the pieces, para hindi maligaw...

filled some imperpections

and smooth sanded, starting from grit 120 and ended up to 220

 
Posted : 12/02/2011 6:53 am
(@jonathanscruz68)
Posts: 1492
Noble Member
Topic starter
 

Re: MORRIS CHAIR, building a classic.

glueing-up the pieces.

 
Posted : 12/02/2011 6:56 am
Page 2 / 14
Share: